Welcome Guest

Design Engineering >> CAD Design Engineer / CAD Designer 
Autocad Designer Resume Sample, Experience : 4 years

Sponsored Links :


    

Biodata

Name of the Candidate:[Private]
Name of the Post Applied:Autocad Designer
Job related skills / software: Make MDS & Detail Drawings of static equipment (Pressure vessels,Heat exchanger,Columns,Storage tanks, etc) & Generate Isometric as per P&ID.
Category:Design Engineering
Sub Category:CAD Design Engineer / CAD Designer
Years of Experience:4 years
State:Gujarat
Gender:Male
Salary Expected per Month(Rs):more than 1 lakh
Highest Qualification attained:Diploma
Major / Specialization:Mechanical
Email Id:[Private]
 
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :

    

CURRICULLUM VITAE  :
Daxesh Parekh
Email  : daxeshparekh1985 AT rediffmail.com
Mobile No  : 099255 55436
Landline  :02697-226362

PERMANENT ADDRESS  :
“Maikrupa”
Near Parekh pole,
Chokshi bazaar.
Petlad, Pin  : 388 450
Dist  : Anand , Gujarat

OBJECTIVE  :
Seeking for a Challenging Career in which I can Utilize my Whole (~3 yrs) Drafting Experience & Exposure in Engineering Industry. Maximizing Job Content and Efficiency Individually, in a Group Situation and Within an Organization; Achieving Maximum Proficiency in Fields of System Study, Re-Engineering and Value Analysis That Will Bring About Business Success.

ACADEMIC CREDENTIALS  :
Diploma in Mechanical Engineering Technical education board(Gujarat) July-2008 64.23%
Higher Secondary H S E B (Gujarat) March-2003 Pass class
Secondary S E B (Gujarat) March-2001 75.57%

PROFESSIONAL SKILLS  :
 Knowledge of major industry Codes and Standards (e.g., ASME, TEMA, API etc.) applicable to Pressure Equipment.
 Familiarity with software for design. (PRO-PIPE, PVElite 2008, AUTO-CAD, SOLID WORKS etc.)
 Good communication skills

PROFESSIONAL EXPERIENCE  :
FIL SEP EQUIPMENTS PVT LTD, Vadodara Equipment Designer From February 2010 TO May 2011.

JOB PROFILE  :
Asign the tasks in the following activities for Filters, Vessels, Coalescers & Heat Exchangers.
 Understanding Client specifications, Datasheets
 Selection of Materials based on Design conditions as per ASME SEC 2D
Identification of equipment auxiliaries  : Nozzles, Instruments, Flanges, Valves.
 Calculation of preliminary thickness & height of Vessel shell & Septum plate.
 Identification of PWHT & Radiography as per Datasheet & Code requirement.
 Preparation of General Arrangement drawing

V-CARE ENGG PVT LTD, Vadodara  :
Draftsman Mechanical From May 2011 To May 2013.

Responsibilities  :
Asign the tasks in the following activities  :
 Understanding Client specifications, Datasheets
 Make MDS & Detail Drawings of static equipment (Pressure vessels,Heat exchanger,Columns,Storage tanks, etc) & Generate Isometric as per P&ID.
 Also visit a site & make a detail & fabrication drawing as per requirement.
 Design of static equipment like Pressure Vessels, Heat Exchangers, Towers, Tanks etc., in compliance with international codes and standards, project specifications, & general specifications prevalent in Oil & Gas, Fertilizer, Chemicals & other associated industries.
 Prepare and check drawings for static equipment.
 Review fabrication drawings furnished by vendor.
 Co-ordination and execution of orders with vendors
 Conduct Review Meeting to Know The Status Of Project.

Delta Doha Corporation (QATAR)  :
Draftsman Mechanical From June 2013 Onwards.

Responsibilities  :
Till now, I had been engaged in following activities  :
 Create Item Code for all parts and assemblies of Well head, Christmas Tree & Valves on ERP System.
 Make GA and Detail Drawing for Well head, Christmas Tree & Valves As per API 6A.
Sponsored links :

In Autocad and Solid Works.
 Also Make Raw Material Drawing And Bill of Material for Each component.
 Follow-Up to Production / Planning / MTO / Purchase Department.
 Conduct Review Meeting to Know The Status Of Project.

Major Project Done In FIL+SEP Equipment Pvt. Ltd.  :-
 M/S Reliance Petroleum Ltd.
 M/S Uhde India Ltd.
 M/S Technip Kt India Ltd
 M/S Deepak Fertilisers and Petrochemicals Corporation Ltd.
 M/S HPCL
 M/S BPCL
 M/S NOCL
 M/S Mangalore Refinery Corporation Ltd.

Major Project Done In V-CARE Engineering Pvt. Ltd.  :-
 M/S Zamil Industries Pvt. Ltd. (Damam-Saudi Arabia)
 M/S Fluor Daniel
 Saipem Ltd.
 Samsung Engineering Ltd
 Foster – Wheeler
 Saudi Aramco Ltd.
 M/S GEA Process ltd
 M/S TOYO Engineering Pvt, Ltd.
 M/S Reliance Petroleum Ltd.
 M/S Uhde India Ltd.
 M/S IOCL

Major Clients  :-
ZAMIL INDUSTRIES LTD (Damam-Saudi Arabia) RELIANCE, UHDE, TOYO, LURGI, IOCL, LINDE, TECHNIP, SAMSUNG, FOSTER – WHEELER, GEA, Etc.

Auto-Cad Experience  ::
 I Have 3 Years Experience in Auto-Cad.
 I Have 1 Years Experience in Solid Works.

Present Designation  ::
Draughtsman Mechanical in Engineering Department.

PERSONAL VITAE
Father’s name  :Harshadbhai R Parekh
Date of Birth  : 21st December-1985
Marital Status  : Married
Contact no.  : 02697-226362 (Home)
Passport no.  : H-1269455

Declaration  :
I consider myself familiar with Mechanical Engineering aspects. I am also confident of my ability to work in a team.I hereby declare that the information furnished above is true to the best of my knowledge.

Daxesh H Parekh

Notes

1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.