B V S N RAJU,
c/o Veda nageswararao,
Door no : 6-6,
Opp :HDFC BANK,
Jaggayyapet-521175.
Krishna dist,
Andhra Pradesh-INDIA.
Expect salary NA
CORE STRENGTHS :
Team oriented leadership Employed supervision
Planning &Development Self-dedication
Safety system Quality control
Budgeting & scheduling Automated control system
Operation Maintenance Diagnose /Troubles shoot problems
Electrical maintenances support Power Generation / Distribution.
Effective time management Power saving & consumption
Profile :
Having 20+ years experience in Mining /Cement, Chemical, Power / Utilities handling to Projects erection and commissioning or Operations and maintenances.
Both practical as well as theoretical knowledge of Different Electrical Instruments.
Good understanding of Electrical Drawings, Planning of Projects, E&C AND O&M.
Planning& Responsibility :
: Hard work, quality work, quantity, defined job work, Equipments protection, power management, analysis, Improved the equipment Efficacy, and systematic planning work, coordinate the other deportment etc.
Projects (Greenfield/Brownfield) Erection & commissioning, testing and safety systems & protection systems for motors & transformers etc. (Siemens-siprotec relays, micom, spam150c etc.).
Knowledge with MIS system &Computerized Maintenance Management Systems (CMMS), Maintenance programs, practices and procedures is essential.
Working more efficiently and productively so that maxes. output comes
Regular to checking and analyzing of organizations Electrical Load Consumption with Ratios and analysis.
Planning & scheduling assignments to achieve pre-set goals within time parameters. Formulating long term/short term strategic plans to enhance operations.
Summary :
20years +of solid experience in the Electrical and Instrumentation in erection &Pre-Commissioning & Commissioning/ operation & maintenance , planning related to cement industry and process plants, hazardous areas viz. gas plants etc.
Experience with installation and testing electrical systems including cable ways, cable laying, equipments and panel installation, ELV works, panel calibration works and cable insulation test & continuity check.
Coordinate with clients, consultants, supplier and sub-contractors to achier target schedule and attend all necessary coordination meeting.
Admirable experience working as an electrical operation & maintenance skills.
Good Understand of electrical maintenance work processes practices.
Familiarity with electrical controls systems repair, electrical systems repair and installation techniques.
Solid knowledge of medium/high voltage motors and electrical distribution systems
Deep knowledge of PLC and automation systems.
Skilled in analyzing root cause failure and Total Productive.
Exceptional knowledge of the VFD drives, computerize control and power distribution.
Remarkable communication skills.
Breakdown maintenance and continuous improvement activities of Electrical & Instrumentation
Knowledge and troubleshooting experience of HT/LT Motors, MCC Panels, HT/LT Switchgears, AC Drives, Stacker Cum Recamier Machines, EOT Cranes, HT/ LT Cable Work, Electrical Luminaries & Different types of Elect. Instruments.
Pre planning and scheduling the daily, weekly, monthly jobs and shut down jobs Activities. Listing & arrangement of the spare parts, and spare regarding shut down activities.
Book keeping record for all Equipment history especially Major equipment, which include all maintenance carried out detail, maintenance comment, All test results like Electrical test, oil test, Gas test and vibration record for all major equipments.
Knowledge and troubleshooting experience of Instrumentations like RTD, Limit Switches, Transmitters, Pneumatic Valves, Load cells, Level Switches etc.
Worked on relay controls, PLC & DCS control. Dc drive panel, Battery Charger, Generator AVR, transformer AVR and digital governor (wood ward 721 digital control).
Daily, weekly and monthly check on electrical equipment.
Wartsila NSD, DG Generators erection, commissioning and operation, maintenances activities.
Power and Distribution Transformers, MV & LV Switchgears, MV & LV Capacitors, MV & LV Squirrel-Cage and Slip-Ring Induction Motors, MV Synchronous Induction Motors, DC Motor, DC Drives, LV&MV Variable Speed Drives, LV Soft Starters, Control & Protection Relays, Transformer, CT & PT testing, Control Relay Testing. Collecting Spares Details and making DPR for Purchasing Order, Checking and Maintaining Electrical Spares.
Educational & other additional information) :
Z P Higher Secondary School, I.Polavaram, 1988/1989 SSC 50%
Industrial Training Institute (AKPH-I.T.I-NCVT), Ravulapalem 1989/1991 ELECTRICAL 70%
Govt. Polytechnic (part time), GAYA 2002/2005 DEE 60%
Karnataka state Open University, (part time), Mysore, 2011/2014 B.TechElectrical engineering.(60%)
Certificate courses :
ACS PLC Automation Training, PUNE, 2010 PLC,DCS,SCADA, VFD etc,
Leadership training.
SAP Training for PO Modules.
Computer skills :
Good knowledge of all Microsoft Office packages, basic knowledge of AutoCAD, Photoshop, and Flash Media Player
Operating systems :Windows XP, Windows8.1, 8, 7, vista. AN-Local Area Network/Vi-Visual Interactive/SAP-System Application Product/Active-X Data Objects etc.
PRESENTLY working-(From July 2010 to till date) :
As an ELECTRICAL ENGINEER from M/s Jaypee balaji cement ltd (Jaypee group) at Jaggayyapet, India.
(Project Capacity : 12000/tpd for single line KILN (FLS MAKE)
VRM&MVR for RAW MILL, Cement mill : 450 /tph (GEBR.PFEIFFER INC, GERMANY)
Ball Mill (FLS make) : 180/tph,
Roller Press (FLS make) : 280/tph.
Project CMD-75MW ,
CPP CAPACITY -25+35 X 11 KV ,
132kv/ 6.6KV, 11KV switch yard. .
Crusher (FLS make) : 2000/tph,
Starker/ Recliner : 2500/tph,
Power Plant (SIEMENS –make) : 35, 25 MW (CPP).
Roto –Packers (EEL&FLS –make) :110/tph,
Wagon Loading (EEL&FLS-make) :110/tph
Two stage Pre-heater 180 feet.
Present Key Skills :
Present I am working as an Engineer for plant Operations and Maintenance
Preventive and productivity Maintenance of all electrical Equipments.
Collecting Spares Details and making PR for Purchasing Order,
Checking and Maintaining spares& prepared Budgeting of stores & spares,
Analyzing power consumption.
Compressor and plant utilities.
EOT and Hoist Drives and controls.
Plant Lighting and Central AC Systems.
IT related job works.
ISO documentation.
Train up new Electricians and Assisting Shift Electricians.
PROJECTS :
DANGOTE group, Nigeria( Erection & Commissioning and operation & maintenance )
(Fully automatic SCADA operation) Gas Firing.
FLS deigned Project at Nigeria (Obajana cement plant) 2 Lines (5000 each-line),
THE ACC LTD, NIGERIA
SITE : Obajana cement plc,
Erection, commissioning and operation & maintenances activate.
SRI VISHNU CEMENT LTD, Telangana State, India.
Kiln capacity :4000/tpd,
Ball mill :4no’s ( 110/tphx2no’s & 120/tph x 2no’s)
Key skills : operation& maintenances in electrical equipments,
6.6kv/2mw slip-ring induction motors,
Kiln 1000kw DC drive, plant manual operation.
All LT/HT filed electrical operation /maintenances activities handling.
Wartsila NSD (15MW DG power plant) erection, commissioning and operation, maintenances activities.
Gas Based –CCPP, DCS-Operation.
445MW/400KV CCPP GAS BASED PROJECT, DCS operation) Worked with L&T ECC/E&C,
SITE : Konaseema Gas power ltd, INDIA.
155MW LMZ GAS GENRATORS-2NO’S
SIEMENS MAKE 140MW Stem GENRATOR ,
Switchyard 400kv/445mw.
Edible oils plants ( 5.1/2 years )
02 No’s Edibles Oil’s plant (oil’s and Chemical products) .
-PROJECTS RESPONSIBILITIES :
Responsible for overseeing the construction supervision and inspection of erection, testing, pre commissioning & commissioning.
PCC, MCC and AUX Panels and cable terminations.
Earth Pits of Sub-Station and Generator & AUX.
Erection of AC, DC Motors & AC Drives.
EHV /HV switch yards,
Generators, transformers, HT < switch boards,
HT & LT motors Erection, commissioning, testing etc.
Wartsila engines –HFO firing (5000KVA)
Skoda engines –diesel firing(3000KVA)
Cummins engines –diesel firing(5000KVA)
ABB-make AVR PANEL,SIEMENS-OCB,CG-make Alternators etc.
Alfa Laval-separators, centrifugal, heat exchangers etc.
Composer systems ,HFO heating heaters,
Control /power load centers etc.
HT < cable laying power and control.
Battery, battery charger and emergency.
DG sets, fire protection and detection systems, earthling, cable trays, lightings and lightening protections as per drawings and standards of all electrical works.
-Review of engineering drawings and quality control plan and process control and equipment manufacture QS/QA/QC review and monitoring.
Switchgear & MCC’s including, circuit breaker and contractor setting & tripping check.
Commissioning, installation and bus bar and push plates’ connection &Power and control cable termination works.
Loop checking, Insulation resistance checking
Calibration of meters relays switchgear, Interlocks devices etc.
Circuit breaker & contactors setting Cable trays and trenches including.
Grounding continuity, Cable identification and condition checking.
Startup and operational defaults troubleshooting handling.
Installation & leveling, Polarity of terminals & phase sequence, Power and control, tap setting etc.
High potential testing, Verify circuit identificationetc.
Check seals, Glands, Inspect terminations.
Fire alarm systems including.
Installation and testing of system. CCTV systems including
Installation and testing. Batteries & chargers including, confirm rating, Cable connections,
Proper installation and testing.
Check continuity Cable type & size, Testing. Motors including, Nameplate data prepared.
Check bearings, oil levels, wiring, and Terminal connections.
Witness uncoupled run-in, and confirm amperage load Temperatures.
PLANT OPERATION & MAINTENANCE :
Should have Knowledge of Smart MCC (Siemens -Simcode) PLC, AC/DC Drives and other utility equipment.
Operation and maintenances of LRS/GRR sisters.
Handling operation & maintenance of Generators (Wartsila, Skoda, and Cummins).
Supervising preventive and corrective maintenance work orders, assigning subordinates, liaising with other operation and maintenance supervisors to coordinate work activities, endorsing work orders and work permits, and supervising the actual execution of work on site and/or in workshop.
Investigates and troubleshoots maintenance problems and implement the company’s permit to work procedures.
Supervises all maintenance work carried out in the electrical workshop and ensures availability and operability of all workshop machines and equipment.
Also knowledge in planning, preparation of maintenance schedule & developing maintenance history of substation equipments.
Looking after budgeting, indenting, and contract closure, and statutory clearance, mobilization of resources at site, vendor evaluation & development.
Also responsible for technical evaluation of offers, drawing evaluation, modification & approval and responsible for relevant capital improvement projects.
Pre planning and scheduling the daily, weekly, monthly jobs and shut down jobs Activities. Listing & arrangement of the spare parts, and spare regarding shut down activities.
Good in Planning, Monitoring, Cost Control, Contracts Management, Material Control, etc.
Responsible to minimize the breakdowns to the zero level.
Responsible to increase the reliability of the equipment and make the equipment available for the production.
Responsible for ensuring equipment is in good & safety condition.
Responsible to maintain the all cables& panels in good condition.
Should support the sub-ordinates and guide them in the work place.
Responsible for the optimum utilization of the available resources and man power.
Responsible for Energy conservation and optimal utilization of fuels.
Responsible for implementation of the new automation as required by the management.
Personal Effectiveness.
Operation and maintenance of H T& L T Panels (VCB's & ACB's).
Operation and maintenance of 33/11K V Transformers.
Operation and maintenance of 11KV/440 V Transformers.
Operation and maintenance of L T Motors & Starters.
Operation and maintenance of Synchronizing Panels, Relay panels and Excitation panels.
Operation and maintenance of E S P Transformers up to rating of 120KV, 300mA.
Operation and Maintenance of AC drives ACS 800 (ABB) & Siemens Micro Master MM440
Operation and Maintenance of MCC's and PCC's&6.6 KV Panels&6.6 KV HT Motors
Operation and Maintenance of 132kv switch Yard&132 KV Switch Yard Panels.
Operation and Maintenance of transformers up to rating of 2 MVA, 11KV/440V MAKE : ALSTOM.
Operation and Maintenance of Indoor/out door vacuum circuit breakers up to rating of 2500 Amps at 6.6 KV/11KV Rating.
Operation and Maintenance of Air circuit breakers up to rating of 4000 Amps at 415 V Level.
Operation and Maintenance of DC drives up to rating of 1100KW Motors, Make : ABB.(dcs800)
Operation and Maintenance of UPS, Battery charges, and Battery Banks up to rating of 700AH.
Languages known :
Languages Reading Writing Speaking
English YES YES YES
Telugu VERY GOOD VERY GOOD VERY GOOD
Hindi NO NO YES
Personal profile :
Name : Bhupatiraju Venkat Satya narayana Raju
Father’s name : Venkat Raju
Date of birth : 12.05.1971
Marital status : married
Languages known : English, Hindi & Telugu.
Present Salary : Rs: 600,000/ CTC
Expected Salary : Negotiable.
Passport Detail :
Passport No Z2944094.
Date of Issue 11/07/2014
Date of Expired 10/07/2024
Place of Issue Vishakhapatnam.
Personal competencies :
Strategic and general management
Planning and organizing skills
Leading and supervising skills
Deciding and initiating action
Declaration :
Professionalism in one’s work and to face the challenging environment and serve hooking forward to work in an organization that is driven to excellence and promotes organization through hard work.
Place :
Date :