Job Objective:
Looking forward to work in an organization that offers challenging opportunities and which provides innovative work, growth & wide exposure to the latest technologies and a career, which demands the best of my professional abilities, technical and analytical skills.
Total Experience: 6.3years
Experience Summary:
** Worked with RailTel Corporation of India Limited,(Pioneer Infosolutions,Consultancy Agency) from June, 2005 to May, 2006 as a Site Engineer.
** Working with Videocon Industries Ltd., Bharuch since 25 Sept 2007 as a Plant engineering instrumentation Engineer in Plant#2 Finishing Electrical and Instrumentation Department. Currently my position as Section in charge of my department.
Job Responsibilities those I have and had:
** Engineering, Software Development, Erection and Commissioning of Siemens make PLC, HMI and SCADA Systems.
** Working on SIEMENS make AC Drives in various areas of Applications in Project.
** Attended service calls for Troubleshooting of various PLC, HMI and SCADA systems.
** Working on My SAP maintenance module Technology.
** Development, modification and maintenance of new project for increase production and decrease cycle time of Machine based on Siemens and Allen Bradley’s make PLC, HMI and SCADA.
** Development and modification in software of Fanuc make Robot for increase production and decrease cycle time.
** Preventive maintenance, Breakdown maintenance of production related machines like surface grinding/ polishing, Edge grinding/polishing machines and its Electrical controls.
** Maintain and manage spares of other and Siemens make PLC, HMI.
** Training to new Engineers and colleagues of Siemens, Allen Bradley and Robot system.
Products Handled:
** Siemens make PLC SIMATIC S7-200, S7-300, S7-400 Series PLC.
** Siemens make PLC SIMATIC S5-135, S5-155 Series PLC.
** Allen Bradley make PLC SLC, PLC5, Micro Logix and Control Logix.
** Allen Bradley make PLC Programming software- RSLogix 5, RSLogix 500 and RSLogix 5000.
** Allen Bradley make HMI development software Panel Builder.
** Allen Bradley make Transfer servo system.
** Allen Bradley AC drive 1305, 1335, 1336 and flex40.
** Fanuc make Robot R-J3i.
** ABB make Robot.
** My SAP Maintenance module.
** Festo, Ross and Rexroth make pneumatic valve.
** Rexroth and Vickers make Hydraulic solenoid valve.
** Rexroth make proportional valve.
** Proximity, limitswitch, levelcontroller, photocell, vacuum switch and pressure switch.
** Videocon Industries Ltd. (Videocon Narmada Glass Division )
Currently Working as Plant Engineering Instrumentation Engineer. I worked on projects which are based on various PLC, SCADA & HMI systems for 4 continuous production lines.
These lines contain following systems:
** 56 Grinding Machine
12 machine based on Siemens S5-135, S5-155 PLC
12 machine based on Siemens S7-400 PLC
32 machine based on Allen Bradley Control Logix PLC
** 8 Edge Finishing Machine
2 machine based on Siemens S5-135, S5-155 PLC
2 machine based on Siemens S7-400 PLC
4 machine based on Allen Bradley Control Logix PLC
** 4 Sloping Conveyor & Feed System based on Allen Bradley Micro Logix 1500 SLC PLC
** 4 Inspection System & Its Conveyor System based on Allen Bradley PLC5 Rack IO PLC
** 4 SCADA and 4 HMI system
2 SCADA based on Allen Bradley RSVIEW32
** My current project are :
** 2 Nos. Wincc based SCADA development in place of 4 Nos. OP277B
** 2 Nos. System conversion from S5 to S7 system.
** Siemens to Allen Bradley PLC system conversion for one complete line..
Education:
** S.S.C passed from Raj. Board Sambhar Lake in March-1997 with 82.36%.
** H. S.C passed from Raj. Board,Sambhar Lake in March-2000 with 67.54%.
** B.E. Electronics & Communication from Shri Balaji College of Engineering & Technology,Jaipur(Rajasthan University in May-2005 with 62.87%.
Hobbies:
Horoscope Reading and Astrology
Playing
Declaration:
I hereby declare that the particulars mentioned above are correct with best of my knowledge.
(MANISH SHARMA)