Resume :
Omprakash Yadav
QA/QC Engineer (Mechanical & piping
Email :yadavomprakash51012 AT gmail.com
Having 14 years of experience in Construction, Petrochemicals &Refineries, Offshore, Gas Plants and familiar with ASME SEC V& SEC IX, API and ASME B31.3 codes related to Process Piping.
Objective :
To seek for the challenging avenues where my potential matches organization’s goal for the betterment of the organization and my career.
Educational Qualifications :
MECHANICAL ENGINEERING ( DIPLOMA)
RURAL POLYTECHNIC COLLEGE TARI TO HUBLI KARNATAKA
KARNATAKA STATE TECHNICAL UNIVERSITY
ASNT-SNT-TC-1A , 2006 EDITION & RE-CERTIFIED AS LEVEL- II
RT- Interpretation of the weld radiographs.
UT-Ultrasonic testing .
MPT- Magnetic particle testing .
LPT- Liquid particle testing.
Basic in computers, Internet ,AUTOCAD
COMPANY : : HMEL BONACE ENGINEERS PVT LTD
Clients. : HPCL MITTAL ENERGY BHATHINDA
Project. : :DFCU UNITS ONSHORE PROJECT
Designation :QC Engineer (Piping & Welding) TPI
Duration : 28/03/2022 to till date
COMPANY - DEMAC TECHNOLOGIES PVT LTD
Client : : G A C L. (L&T)
Project. : :GACL L&T CHEMICAL ONSHORE PROJECT
Designation : :QC Engineer (Piping Fabrication)
Duration : : 19 /12/2019 to 01/03/2022
COMPANY - HEISCO KUWAIT
Client : : K N P C. (TecnicasReunidas)
Project. : :MAA REFINERY GT 5PROJECT onshore/offshore
Designation :QC Engineer (Piping Fabrication)
Duration : 19 Jan 2019 to12/10/2019
WORK PROFILE :
** Stage wise inspection of fabrication of pipe spools which includes materialidentification, inspection of joint setup.
** Inspection of orientation of piping at the time of fit-up ,Welding &Erection
** Performing Gasket and Bolt verification and Bolt torque.
** Preparation of hydro/pneumatic test package, Line checking and clearing the punchlist Item for hydro/ pneumaticstest.
** Inspection before during and after welding, checking and witnessing NDT (RT/UT/PT/MT) requirements, witnessing PWHT activities, witnessing hydro test and pneumatic tests, line checking review of test package and inspection of coatingetc.
** Prepare various reports such as Inspection Reports, Non Conformity Reports,Material Discrepancy Reports and End of InspectionReports.
** Inspection of welding of carbon steel, stainless steel, LTCS, low alloy steel, Inconeland aluminized steel pipesetc.
** Witnessing of hydro tests and pneumatic tests at site. Test packs clearance (line checking &reviewing ) co-ordination with client.
Project : KOC (Schlumberger) JPF1 AND JPF2
Designation : PIPING QC Engineer
Duration : 15/11/2017 to30/07/2018
Project : GAIL CROSS COUNTRY PIPE LINEPROJECT
Project.Clients : : Gas authority of India limited(L&T)
Designation : QC Engineer (Piping)
Duration : 10/05/2013 to 10/02/2017.(India)
Project.Clients : DRY DOCK ( SAIPEM & Arabiansea)
Designation : QC Engineer (Piping).
Project. : Oil &Gas cargo ship buildingproject
Duration :12/02/2011 to 10/02/2013(Dubai)
Project : QATAR GAS QCSPROJECT
Clients. : Qatar gas(CTJV)
Designation : QC Engineer (Piping)
Duration : 27/09/2008 to.30/03/2010
WORK PROFILE :
** Responsible for inspection of materials as per code and process standerspecification.
** Reviewing RT/MT/PT reports, Post weld heat treatment chart, hardness testreport.
** Monitor project compliance with qualityplan.
** Perform pipe line checkup, ensuring that all installed pipe/fittings are to the correctspecification.
** Identifying the punch list items and clearing the same by coordinating with the constructionteam.
** Perform Re-instatement Inspection after completion of pipingwork.
** Conducting Gasket verification, Flange joint and Bolt torqueing Inspection as perspecification.
** SHUTDOWN /INSPECTION : -(: KNPC - GT 5 MAA REFINERY PROJECT &,K O C - JPF1 SABRIYA AND JPF 2 EAST RAUDHATAIN NORTH KUWAIT)
** Refinery- Petrochemical, Oil & Gas)
** Maintenance & inspection of static equipment such as columns (Bubble cap, structural, mol.
Sieve, valve cap, chimney tray), Heat Exchanger (U Tube, floating head, Fixed, Air fin) vessels (Actifed charcoal, clay, Paul ring, carbon ring, ceramic ring, demister pad, rotor) flare tip, filter, dryer, re-boiler, kettle type re-boiler , scrubber, K. O. Drum, fin fan cooler (stud Type, Plug type) still, stripper, etc.repair and overhauling of furnace, hydro testing of heat exchanger (shell test/ring test, tube test, back shell test/overall test),Retuning, Refectory repair. Handling of catalyst (Removal & reloading) .Involved in inspection of piping vessels and exchangers by using Eddy Current testing, RFET, TOFD and phased array at KNPC GT 5 PROJECT K O C JPF 1 AND JPF 2 PROJECT NORTHKUWAIT
Project : ONGC GT5project
Designation : Piping QC Engineer
Duration : 15/07/2007 to27/07/2008
WORK PROFILE :
** Successfully handed the production operations to get the desire quality of different types ofV-belts.
** Ensure adherence to ISO 9001 quality standards and conducted internal qualityaudits.
** Cost cutting project & processimprovement.
** Plant operations and Technical Trouble shooting to achieve production targets & desired productquality.
** Production activities with qualitynorms.
** Solving Quality Problems at ourends.
** Involve and follow- up the dispatchactivities.
PERSONAL PARTICULARS :
Name : OM PRAKASHYADAV
Father’sname : VIRENDRAYADAV
DateofBirth :07/05/1988
Nationality : Indian
Maritalstatus :Married
Language known : English,Hindi,
DECLARATION :
I declare myself that all the information is correct to the best of my knowledge.
DATE :
PLACE :