Summary :
Having 9+ years of Experience in the field of Quality Assurance and Quality control Services Have performed inspection in the field Oil and Gas Petrochemical Construction Projects, Static, Rotating Equipment, Piping, Fabrication and Erection, Punch list check, Test package Preparation and clearing, Witness Pressure test, NDT, PWHT, coordination, and Interpretation of Radiographs film, Welder Qualification, Welder id card preparation, PQR co ordination and related documentation work,
Technical Qualification :
** Diploma in Mechanical Engineering -2000 to 2003
** Srinivasa Subbaraya Polytechnic Puttur. Sir Kali. India.
** ASNT Level II (RT/MT/PT/UT)
Knowledge in :
** ASME Sec : II, V, VIII, IX
** ASME B31.3
** API 1104
Computer skills :
** Ms office (Word, Excel, Power Point, Access)
** Unix
Working experience :
Project : Shah Gas Development project package 2 & 3
Client : Abu Dhabi Gas Development company
Name of the company : ENI Saipem SPA
Designation : Mechanical QC Supervisor
Duration : From Sep-2012 to till date
Responsibilities :
** Material receiving and Erection inspection of static and rotating equipment
** Static and rotating equipment alignment and elevation and centering inspection
** Column internal trays inspection
** Preservation of static and rotating equipment as per vendor requirements
** Verification and subcontractor mechanical completion certificate.
** Issuance of non-conformance reports (NCR) and action for timely closing
** Coordination to third party inspector
** Co ordinate weakly QA/QC meeting to PMC and subcontractor
** Co ordinate internal QA / QC Audit etc
Working experience :
Project : Epic of Sweet Fuel Gas Supply to Dukhan Consumers
Client : Qatar Petroleum
Name of the company : Black cat Engineering Construction Company WLL
Designation : Mechanical QA/QC Inspector
Duration : From Jan-2011 to Aug-2012
Responsibilities :
** Conducting PQR Qualification, related Documents Preparation like Heat input table, Run sheet updating
** Conducting welder Qualification test, Welder ID card new and renewal card Preparation
** Inspection during fabrication of pipe spools and pipe supports at shop and field.
** Co ordination with the NDT/ PWHT crew
** Preparing hydro test package
** Line check before commissioning activities and assist in Punch list preparation and punch list closing
** Co ordination with construction Team for Re Instatement activities
** Spool released documents preparation and offering TPI inspection
** Review and Assist Contractor in the Preparation of a chart for Service’s requiring PWHT and monitor the PWHT activities.
** Witness & review the PWHT, Hardness reports. Interpret the Radiography films and reports.
** Witness and monitoring of hydro testing.
** Welder RT Performance updating and monitor project repair percentage and welder wise
** Witness & Monitoring of Bolt Tightening activities on Piping.
** Issuance of non-conformance reports (NCR) and action for timely closing.
** Material inspections and verifications with certificates and project specifications.
** Monitor during welding preheating
** Pipe Book updating
** Maintaining the records such as WPS, PQR, Welder Qualification Certificate
** Co ordinate internal QA / QC Audit
Working experience :
Company : St-Joseph Engineering Works. Chennai. India.
Designation : Mechanical QA/QC Supervisor from Jan-2010 to Dec-2010
Client : IOCL, CPCL, TPL, MIL, Etc
Working Experience :
Project : CO Project & VAM Project
Name of the company : Saudi International Petrochemical Company
Position : Mechanical QA/QC Inspector
Duration : 5thJuly 2008 to Dec 2009
Responsibilities :
** Inspection and erection of piping system as per approved isometric & PID drawing
** Inspection of Punch listing of piping prior to MC, RFC&RFSU
** PMI Checking in all Project raw material and all related documents
** Witnessed hydro test, pneumatic test, reinforcement pad leak test, flushing /air blowing
** Checked valve orientation on high pressure steam and other critical lines before erection / fit up
** Verification of field rectification report issued by construction
** Co ordination with construction Team for Re Instatement activities
** Line check before commissioning activities and assist in test pack preparation
** Verified subcontractor MC, RFC & RFSU, Hand over completion dossier
** Conducted material inspection and identification, Reviewed mill certificate/ material test certificate
** Ensure that installed piping components conform to isometric requirements & project specifications.
** Coordinate with contractor representative for as-built drawings, test reports, release notes, final acceptance certificates, etc.
** Conducted fit up and Erection inspection on Steel structural, pipe, critical installations like boiler, Steam drum, super heater, Turbine, Compressor, reactor, steam reformer, reformed gas separator, process condensate stripper, regenerator, Heat Exchangers, Pressure vessel, Tank, Air cooler, lube oil skid, in accordance with approved PID
** Coordinate with Contractor Representative to ensure that all construction procedures (WPSs, PQRs, Pressure Testing Procedure, Fabrication Procedure, Site Erection Procedure, NDT Procedures etc.) are in place prior to completing of jobs.
** Ensure that all construction activities conform to the governing construction codes / Specifications / Standards and drawings which entail piping welding inspection NDT reports, review final QA/QC dossiers.
** Maintaining Housekeeping at a high level within the department through the involvement of all team members.
Working Experience :
Name of the project : Qatar Gas QCS QG3 &4 LNG onshore projects
Name of the client : Chiyoda Technip joint venture (CTJV)
Name of the company : Gama Com W.L.L Qatar
Position : Mechanical QA/QC Inspector
Duration : 7thJun 2007 to 11thJun 2008
Responsibilities :
** To carryout in stage inspection and final inspection fabrication and site erection.
** Spool released documents preparation and offering client inspection
** Ensure that installed piping components conform to approved isometric and project specification
** Witnessed hydro test, pneumatic test, reinforcement pad leak test, leak test
** Co ordination with the NDT/ PWHT crew
** Offering and coordinating the client inspection
** Preparing hydro and pneumatic test package
** Prepare RFI request and summit client
** Inspection of PMI and Material verification.
** Inspection of fit up, welding and consumables as per the client requirements
** Inspection of punch list of piping prior to hydro and pneumatic testing
** Conducting all calibration of all welding equipments and maintaining the data’s
** Conducting procedures and welder qualification test
** Inspection of material necessary for installation as per standards
** To supervise daily inspection of fabrication work shop and erection of the same at site
** Prepare and summit the work completion report to the SNR Engineer
** Maintaining the records such as WPS.PQR, NDT, PWHT, HT, inspection data’s & QC dossier
** Supervised radiograph as per acceptance standards ASME
** Ensure employees are trained to do their work and their training is documented.
Working Experience :
Company : Mil Industries Ltd.
Chennai. India.
Designation : Mechanical QA/QC Supervisor from 06-May-2003 to 03-Jun-2007.
Client : Reliance industries ltd, Indian Oil Corporation ltd, Coromandal fertilizers’ ltd,
Responsibilities :
** Contacting stage wise inspection during fabrication and erection.
** To prepare stage and final inspection report
** To verify in coming raw marital specification and customer documents
** Co ordination with the NDT/ PWHT crew.
** Prepare RFI request and summit client
** NDT/PWHT/HT Report Preparation
** Offering and coordinating the client inspection.
** Conducting procedures and welder qualification test
** Inspection of fit up, welding consumables as per the client requirements
** Maintaining all records in QA/QC documents.
** Ensure employees are trained to do their work and their training is documented
** Preparation of pressure test package
** Witnessing calibration activities of pressure gauge and relief valves
** Co coordinating for internal auditing requirements
** Prepare and summit the work completion report to the Manager
** Interprets company policies to workers and enforces safety regulations.
** Initiates or suggests plans to motivate workers to achieve work goals.
** Maintaining Housekeeping at a high level within the department through the involvement of all team.
** Preparation of bill of material as per engineering drawing
Safety course training :
H2S safety training course : by Enertech Aviation & Maritime Academy
Permit to work : by chiyoda technip joint venture safety departments
H2S safety training : by chiyoda technip joint venture safety departments
Shop and site work : Total safety council Qatar
Personal Profile :
Date of birth : 10/06/1984
Nationality : Indian
Language know : English / Tamil / Malayalam / Hindi
Martial status : Married
Declaration :
I hereby assure that the above details are true to the best of my knowledge and belief.
Place :
Date :