Welcome Guest

Site / Construction >> Maintenance Engineer / Manager 
Electrical Maintenance engineer Resume Sample, Experience : 6 years



Name of the Candidate:[Private]
Name of the Post Applied:Electrical Maintenance engineer
Job related skills / software:Maintenance of equipment within the planned budget. Reduce Break downs thereby increase productivity, During power restriction periods, daily planning and preparing plant operation schedule as per the requirement of operation department by considering maximum demand and units (KVAH) available, Review of maintenance results and discussion with G.M and other departmental heads.
Category:Site / Construction
Sub Category:Maintenance Engineer / Manager
Years of Experience:6 years
Salary Expected per Month(Rs):30,000 to 40,000
Highest Qualification attained:B.Tech. : Bachelor of Technology
Major / Specialization:Electrical & Electronic
Email Id:[Private]
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :


raoganesh151 AT gmail.com
Mobile No 
: +918793440575

To serve in field of Electrical Engineering in professionally managed Organization with abundant opportunities for learning and scope for rapid growth.

Current Employment  : JSW Steel Limited (Indu plant Pvt. Ltd)
Designation  : Electrical HSK.
Duration  : June 2014 to till date.

** Troubleshooting and maintenance of 6.6kv HT panels, VCB.
** Performing general, breakdowns, shutdown maintenance activities of step-up and step-down Transformers up to 20MVA.
** 1800KVAR Capacitor Bank at 6.6KV Level Erection & commissioning.
** Battery Chargers /UPS/ Battery Banks.
** Variable voltage variable Frequency Drives of various ratings up to 150 KVA of different makes.
** DG sets will all reputed OEM(operation engineering maintenance) like Cummins
** Centralized Chillers including low side distribution
** Exhaust and ventilation systems
** EOT and Cranes, Conveyers
** Fire protection includes Hydrants, Sprinklers and Gas suppression systems comply with NFPA (national fire protection association) standards.
** Troubleshooting and maintenance of chillers, cooling towers, screw compressors, boilers, blower’s electrical equipment’s.
** Overhauling of HT and LT motors up to 1280kw.
** Hands-on experience of BOD, ETP, desulphurization, decomposition ammonia.
** Having experiences erection and commissioning of By-product in cock oven unit.
** Troubleshooting and maintenance of transmitter’s i.e.., FT, LT, PT, TT.
** Operation, Maintenance of AC drives and Programming of VFD Drives.
** Activities included day to day Super vision, Reconditioning of old equipment’s, commissioning and startup of new equipment’s.
** Planning of Spare parts.
** Planning of Manpower in shifts.

Previous Employment  : Bhilosa Industries Pvt Ltd, Silvassa.
Designation  : Electrical & Utility Engineer.
Duration  : Jan 2011 to May 2014
** Handling of 66/ 11kV Switchyard.
** Knowledge of SF6 circuit breakers &VCB, ACB breaker.
** Operation & Maintenance of 5 X 2 MVA, 2 X 4 MVA, 7.5 MVA &17.5 MVA Transformers.
** Operation & Maintenance of up to 900kW AC Motors and slip ring motors.
** Troubleshooting & maintenance of Blowers (35kw).
** Responsible for smooth functioning and quality of utilities (water, steam, compressed air, gas, LPG, firefighting system, cooling circuits, heating).
** Troubleshooting & maintenance of ELGI compressors (8000cfm & 6500cfm), Kirloskar compressor (1200cfm).
** Ensure proper functioning of compressed air installations 3bar, 6 bar.
** All Break downs are attended without delay and with minimum loss of production.
** Maintenance of equipment within the planned budget. Reduce Break downs thereby increase productivity.
** During power restriction periods, daily planning and preparing plant operation schedule as per the requirement of operation department by considering maximum demand and units (KVAH) available.
** Review of maintenance results and discussion with G.M and other departmental heads.
** Planning of Manpower in shifts.
** Planning of Spare parts.
** Implementation of Maintenance Management methods.
** Preventive maintenance of softener plant, R.O. plant and cooling tower
** Checking monthly power consumption reports.
** Maintaining ISO documents and SAP through maintain preventive maintenance, break maintenance, root cause analysis and preparing indents, gate pass.

** Good knowledge in protective Relays for various equipment’s like EHT equipment’s, Motors, Transformers etc.,
** Played a key role from the Department in implementation of SAP based application for my current employer.
** Able to analyze the electrical drawings & to follow the same while trouble shooting the problems.
** Maintenance of PLC Samsung in NX-700 model, programming of ERIC Drive Transistorized inverter.
** Have a good command over maintenance & troubleshooting of PCC, MCC panels and capacitor banks.
** Ensure proper functioning of the raw water facilities, water wells, water softening plants and cooling towers.

** Replaced C.T & P.T with installing and commissioning 17.5MVA transformer (66/11KV).
** Installation RTCC panel and V.C.B panels.
** Installation of 8000cfm compressor with soft stator, relay logic and installing and
** Commissioning of control and power circuits.
** Installation and commissioning of 900 kW Motor.
** Installation, commissioning of AC DRIVES(YUKAWA F7,G5 Series)
** Field wiring and loop testing of required project.
** Existed transformer ONAN to ONAF by adding radiators and existing fans as per the requirement.

Theoretical knowledge  :-
** SCADA, development in Wonder ware In Touch (Win95, WinNT, and Win95/98).
** Creating & editing graphic display with animation
** Creating Alarms, Trending.
** Writing logic through script.
** PLC in Allen Bradley, Siemens
** Development of Logic for all instruments i.e.
ladder logics SLD.
** Development of Safety Interlocks.
** Troubleshooting and fault diagnostics of PLC.

Practical knowledge  :-
** Maintenance of PLC Samsung in NX-700 model.
** Using digital inputs, digital outputs, analog inputs, analog outputs, RTD.
** Maintaining alarms, tripping commands, interlocks.

Previous Employment  : SkillTech Pvt Ltd
Designation  : Electrical Site Engineer
Duration  : Dec 2009 to Dec 2010.
HVDS Phase-3  : Worked on 3-phase 100KVA,63KVA ratings of Distribution transformers of the feeders, Secondary side of the 100 (or ) 63 KVA T/F is converted to 11KV from 440V and single pole mounted 25KVA (Or) 16KVA transformers are erected by Calculating motor HP and place suitable transformer near to the load.
Reviewed the operational practices, identified the areas of obstruction/ quality failures and advised on system and process changes for qualitative improvement in productivity.
Developed and implemented strategic plans that exceeded expectations in revenue retention/growth, profitability and customer satisfaction.

B.Tech  :
Area of Specialization  : Electrical and ElectronicsEngineering
College  : St. Johns College of Eng. & Tech, Yemmiganur, Kurnool (D)
University  : JNTU, Anantapur, A.P
Year of Passing  : May, 2009

Good Communication Skills
Enthusiasm to learn and Hard Work
Ability to work Under Pressure.

Father’s Name  : G.Mruthinjaya.
Date of Birth  : 16th July, 1987.
Sex  : Male.
Marital status  : Single.
Permanent address  : D.No.:7/586, Ganesh nagar, K.L.D. Road, Anantapur, A.P.
Nationality  : Indian.
Languages Known  : English, Hindi and Telugu.

I hereby declare that the information stated above is true and correct to the best of my knowledge.

Place  :
Date  :

G. Gnaneswar Rao


1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.