Personal Information :
Nationality : Indian
Year of Birth : 15/03/1973
Marital Status : Married
Profession : Design/ Engineering/Projects
Specialization : Control & Instrumentation Engineering
Position : Senior Control & Instrumentation Design Engineer
Qualifications :
- Bachelors of Engineering in E & C pass out in 2000 with First division from Jamia Millia Islamia, New Delhi (India)
Key Work Experience :
- 10+ yrs exp. in Conceptual, Front-end engineering design & Detailed Engineering, Procurement Engineering and Construction Management in the field of Process Instrumentation & Control Systems in Oil & Gas, Refinery, Petrochemical & Power Plants.
Professional Experience :
Employer : Precision Engineering and Consultancy
Project Name : Permanent Production Facilities in Farah & Saiwan fields for CC Energy Development / Al Noor Production Station (PDO)
Position : Senior Control & Instrumentation Design Engineer
Period : September, 2011 to till date
Scope :
1. Conceptual Design : Preliminary engineering & feasibility studies, Site identification & evaluation, Project & scope definition review, Cost estimating and schedule development.
2. Front-end Engineering Design : Review of P&ID, Preparation of Instrument Index, Technical specifications & Datasheets for Process instrumentation and control systems like control valves, pressure relief valves, temperature sensors & transmitter, pressure instruments, level instruments, flow meters, DCS / PLC systems, Fire and Gas detectors etc. Sizing and selections of instruments.
3. Detailed Engineering : Preparation of Cable Block diagram, Instrument location layout, cable trench layout, cable schedules, Interconnection diagrams, hook-up drawings, Instrument loop diagram, Functional logic diagram, Cause & Effect Diagram, I.O. List, System architecture diagram, Bulk material MTO, Hazop and SIL participation.
4. Procurement Engineering : Preparation of Request for Quotation (RFQ), Technical Bid Analysis (TBA), Technical Query (TQ), Material Requisitions (MR) and Vendor Drawings review (VDR).
5. Co-ordination with other department, client and venders.
6. Field engineering support & technical clarifications to construction contractors during project execution till project completions.
7. Knowledge of PDO and Shell (DEP) and International (ISA, IEC and ISO) standards.
Employer : Daelim Saudi Arabia Co. Ltd., (KSA)
Project Name : Petrochemical Plant of NCP South Plot Project, Jubail, Saudi Arabia
Position : Instrument Design Engineer
Period : June, 2010 to June, 2011
Scope :
1. Instrument Sizing & selection.
2. Preparation of Specification and Data Sheets of Field Instruments, Control Valves and control systems.
3. Procurement of Field Instruments, Control Systems including preparation of request for quotation (RFQ), technical bid analysis (TBA), technical query (TQ) and material requisitions (MR).
4. Review vendor documents (VDR).
5. Co-ordination with other department, client and venders.
6. Use of software for design and calculations (SPI, Instrucalc etc.)
7. Knowledge of International standards such as ISA, IEC and ISO etc.
Employer : Consolidated Gulf Co. (CGC), Doha (Qatar)
Project Name : Oil & Gas Plant (Control System Upgrade) of Qatar Petroleum (Dukhan)
Position : Instrument Design Engineer
Period : March, 2008 to April, 2009
Scope :
1.
Preparation of Basic & Detailed Engineering documents for Field Instrumentation and Control Systems.
2. Coordination with other dept., client and vendors.
3. Field Engineering support and technical clarifications to construction contractors during project execution till project completions.
4. Use of software for design and calculations (SPI, Instrucalc etc.)
5. Knowledge of Qatar Petroleum standards.
Employer : Al Osais Group, Dammam (Saudi Arabia)
Project Name : Oil & Gas Plant - DCS Upgrade of Saudi ARAMCO
Position : Instrument Design Engineer
Period : April, 2006 to Feb, 2008
Scope :
1. Preparation of Basic & Detailed Engineering documents for Field Instrumentation and Control Systems.
2. Coordination with other dept., client and vendors.
3. Inspections, FAT & SAT participations as per approved procedures being client witnesses
4. Prepare and initiate technical clarifications with vendors to finalize technical bid analysis / evaluation reports for Control Systems (i.e. DCS, ESD, VMS, Fire & Gas etc...)
5. Field engineering support & technical clarifications to construction contractors during project execution till project completions.
6. Knowledge of Saudi Aramco and international Standards.
Employer : AKP Automation Pvt. Ltd., New Delhi (India)
Project Name : Refinery Plant of Parakh Food Ltd., Pune (India) / Power Plant of Atul Ltd.Gujarat (India) etc.
Position : Senior Engineer - Instrument
Period : Jan, 2001 to Jan, 2006
Scope :
1. Supervising & commissioning of various field instruments & Control Systems (DCS, ESD and Fire & Gas etc) as per International Standard.
2. Project Basic Design & Detailed Engineering including review P&ID’s, Preparation of Instrument Index, Data Sheets, Instrument location layout, Instrument cable routing / tray layout, Instrument cable block diagram, Instrument Cable Schedule, Instrument J.B. schedule, Interconnection diagram, Instrument loop diagram, Instrument Hook-up diagram & Material take off etc.
3. Review and approve Vendor Engineering Design Packages and tie-ins related to DCS, ESD and Fire & Gas.
4. To participate in engineering technical review meetings and to attend FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) of DCS, ESD and Fire & Gas.
5. Field engineering support & technical clarifications to construction contractors during project execution till project completions.
6. Knowledge of International standards such as ISA, IEC and ISO etc.
Skills :
1. Proficient in Smart Plant Instrumentation (Intools) V7.0
2. Proficient in Instrucalc soft for calculation of control valve and Flow Element.
3. Familiar with DCS (CENTUM-CS3000) Yokogawa, ESD (Triconex), VMS (series 3500) Bently Naveda and other control systems (PLC / F&G).
4. Proficient in Microsoft office advance knowledge in Microsoft Word, Microsoft Excel and reviewing software (2D and 3D modeling).
Training Information :
Smart Plant Instrumentation (INtools) V 7.0
Computer Proficiency :
Operating system : MS-DOS, UNIX, Windows-NT, Windows-98.
Languages : C, C++, VB.6, FORTRAN and Java 2.0.
Packages : Excellent in AutoCAD and MS Office 2000 (Access, Excel, word, Power Point etc.)
Language known :
Mother Tongue : Hindi, Spoken fluent; written fluent; reading fluent
English : Spoken fluent; written fluent; reading fluent