Welcome Guest

Design Engineering >> Embedded System Design Engineer 
Fresher Embedded Developer Resume Sample

Sponsored Links :


    

Biodata

Name of the Candidate:[Private]
Name of the Post Applied:Embedded Developer
Job related skills / software:Keil, Matlab,Webots,Proteous, Solidworks,AutoCAD,Xilinx,Can Protocol
Category:Design Engineering
Sub Category:Embedded System Design Engineer
Years of Experience:0 years
State:Tamil Nadu
Gender:Male
Salary Expected per Month(Rs):15,000 to 20,000
Highest Qualification attained:M.E. / ME : Master of Engineering
Major / Specialization:Embedded System
Email Id:[Private]
 
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :

    

RESUME :
ANANDA RAJ P
35, 2nd Street,
Valliyammai nagar,
Kangayam road,
Tirupur-641604.

Email : anandpalaninathan AT gmail.com
Contact no : +91-9500207589

CAREER OBJECTIVE :
To be competent in both core and frontier disciplines through familiarizing industrial practices along with educational process. With deep sense of social commitment and ethics to develop my career in the areas of Analysis, Design, consultation where I can grow, excel and groom my skills that would add fuel to the company and helps in the enrichment of my career.

EDUCATIONAL QUALIFICATIONS :
** M.E(Embedded System Technologies) Anna University Regional Campus- Coimbatore Anna University 2016 7.3*(CGPA upto 3rd sem)
** B. E (E.C.E) The Kavery Engineering College, Salem Anna University 2014 71.6%
** HSC Vidhya Vikashni Matric hr sec school, Tirupur State Board 2010 73%
** SSLC Velavan Matric School, Tirupur Matriculation 2008 77.4%

AREAS OF INTEREST :
** VLSI
** Microcontroller based System Design
** Design of Embedded System
** Software for Embedded System
** Robotics and Control
** Advance Embedded System
** Digital Electronics

TOOLS KNOWN  :
** FPGA
** ALTERA Quartus II, XILINX ISE.
** Circuit Simulation
** Tanner.
** HDL Language
** MATLAB
** VHDL, Verilog.
** Robot simulator
** RoboBASIC IDE, Webots
** Software Development in C
** CAN Protocol
** AVR studio4, KEIL,MPlab
** Software Development in Assembly
** 8051, PIC, ARM7
** FPGA Kits known
** ALTERA D2,D0
** Solidworks
** AutoCAD

LANGUAGE KNOWN :
** C & C++
** EMBEDDED C
** VHDL & Verilog

STRENGTHS :
** Self-motivated, Optimistic and Humorous.
** Maintaining good inter-personal relationship.
** Quick Learner and Good Hard Worker.
** Motivating others and Confident in Decision Making.
** Extrovert person and always interested in doing new things.

PROJECT DETAILS :
ME -PHASE I PROJECT :
“A Successful Impact on Robot Assessed by Gait Learning Using ABC”

Duration : 1 Year

Project Summary :
** Robots have become irreplaceable assistants ever since automatic production. So robots are one of the most essential projects in this field. Humanoid robots in particular are the most interesting subject among robots.
** The development of humanoid robots and artificial intelligence helps people further understand how human beings think and how they react to their environment.
** Tried that a humanoid robot can step and walk using simple sinusoidal desired joint trajectories with their phase adjusted by a coupled oscillator model. It uses the centre-of-pressure location and velocity to detect the phase of the lateral robot dynamics.
** This phase information is used to modulate the desired joint trajectories. A collision avoidance method for a biped robot with an upper body, a method the robot stops in front of an obstacle by generating arm force.
** Simulation of robot motion will be design by using webots robot simulator software.

BE - PROJECT :
“A Low Power CAM Gains High Speed with Parity Bit and Power Gated ML Sensing Technique”

Duration : 1 year

Project Summary :
Content addressable memory (CAM) offers high-speed search function in a single clock cycle. Due to its parallel match-line comparison, A parity bit that leads to sensing delay reduction at a cost of less than area and power, an effective gated-power technique to reduce the peak and average power consumption and enhance the robustness of the design against process variations. The proposed design can work at a supply voltage down to 0.5 V.
Sponsored links :

CMOS, content addressable memory (CAM), match-line using Altera D2.

ACTIVITIES AND CERTIFICATIONS :
** Certified Implant Training in Bharat Sanchar Nigam Ltd. Salem SSA during the period 2nd-6th Feb 2013.
** Presented Papers in various Engineering colleges and won awards.
** Organized workshops and conferences at AURC-CBE.
** Organized National Level NSS Camps, Student Committee at AURC-CBE.
** Organized National Level Workshop Robotyrist’14 at TKEC.
** Organized National Level Conference NCFIRE’14 at TKEC.
** Coordinating Student Welfare Development Committee.

CO-ACTIVITIES AND CERTIFICATIONS :
** Participated in Photographic Exhibition on wildlife & Nature “OSAI’s UyirNizhal 2015” at Tamil Nadu Agricultural University, Coimbatore on October 28- November 1, 2015.
** Participated in National Service Scheme, Special Camping Programme on the theme Healthy Youth for Healthy INDIA organized at velar village on 4-10 January 2012.
** Participated in Red Ribbon Club by Tamil Nadu State AIDS Control Society at The Kavery Engineering College on 11th Feb 2011.
** Won Zonal & District Level Ball Badminton Tournaments and achieved 1st & 2nd place.
** Participated in the Drawing Competition, organized by Veda Academy.
** Participated in the Marathon Running Race for the cause of Plantation and Independence Day special.
** Participated in Tamil Nadu State Level Flying Disc Championship organized by Salem Flying Disc Association & Sri Vidhyamandir Secondary School, Salem and secure 3rd place.

PAPER PRESENTATION :
** Presented a paper titled, “ALow Power CAM Gains High Speed with Parity Bit and Power Gated ML Sensing Technique” in SANUS’13, National Level Technical Symposium organized by SNS College of Engineering, during 5-7, September 2013.
** Presented a paper titled, “Artificial Vision towards Creating the Joy of Seeing for the Blind” in BINOCS 2K13, National Level Techno Carnival organized by Adhiyamaan College of Engineering, Hosur during 2nd April 2013.
** Presented a paper titled, “Object Identification by Neural Network” in VISHMAYA’12, National Level Technical Symposium organized by Ranganathan Engineering College, Coimbatore 29th September 2012.

PROJECT PRESENTATION :
** Presented a project model titled, "Robot Motion Authorization using Finger Robot Interaction" in Kavery Techfest’13 organized by The Kavery Engineering College, Salem on 10th and 11th October 2013.
** Presented a project model titled, "Alcohol Identification while Driving" in Excel Science & Tech Expo 2013, organized by Excel Group of Institutions, Salem on 11th and 12th January 2013.
** Presented a project model titled, "Line Tracking Robot" in Excel Science & Tech Expo 2013, organized by Excel Group of Institutions, Salem on 11th and 12th January 2013.
** Presented a project model titled, "Coin Based Mobile Charger" in Open House Science Exhibition’11 organized by The Kavery Engineering College, Salem on 12th and 13th October 2011.

PERSONAL DETAILS :
Name : Ananda raj P
Father's Name : Palaninathan S
Date of Birth : 30-01-1993
Gender : Male
Nationality : Indian
Marital Status : Unmarried
Languages known : English, Tamil
Hobbies : Listening to music, Reading books.
Entertainment : Playing Cricket & Ball badminton, Videogames

Permanent Address : 35, 2nd Street,
Valliyammai Nagar,
Kangayam road,
Tirupur-641604.

DECLARATION :
I do hereby declare that the information furnished above is true to the best of my knowledge and belief.

Place : Coimbatore
Date :

Ananda raj P

Notes

1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.