Welcome Guest

Site / Construction >> Installation Engineer / Commissioning Engineer 
Manager Instrumentation and Data logging systems Resume Sample, Experience : 8 years



Name of the Candidate:Pradeep Kumar Tripathi
Name of the Post Applied:Manager Instrumentation and Data logging systems
Job related skills / software:NI Labview
Category:Site / Construction
Sub Category:Installation Engineer / Commissioning Engineer
Years of Experience:8 years
State:Uttar Pradesh
Salary Expected per Month(Rs):90,000 to 1,00,000
Highest Qualification attained:B tech
Major / Specialization:Electronics and insrumentation engineering
Email Id:p.tripathi1988 AT gmail.com
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :


Curriculum Vitae Instruments Engineer Mohammed Abdou Helal Mob.: +966 50 948 3060 Email: m.hlal@yahoo.com Career Objective I am looking for a good position in the field of instruments and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final output. Personal Details Profile: Male, 38, Married, Egyptian, Muslim Current Position: Instruments and Control Systems Engineer Current Location: Jeddah – Saudi Arabia VISA (Iqama) Status: Valid - Transferable Summary of Skills:  About 12 years of experience as an instrumentation and control systems engineer in detailed maintenance, commissioning and development co-ordination of instruments and control systems in Power Plant, Desalination Plant and Mixing Plant projects.  Configuring and faults diagnosis of DCS, PLC, SCADA, RTU, Profibus Communication, Analyzers and Control Loops. o DCS : PCS7 v6.0 Siemens and Centum CS3000 Yokogawa o PLC : Siemens simatic S7 200,300,400 and GE Fanuc series 90-30 o SCADA : WINCC/Siemens, ICONIX and IFIX/GE  Installation, calibration and loop checking of the field instruments ( Emerson Rosemount, ABB, Endress & Hauser, Bently Nevada, Honeywell, Yokogawa, Vega, Polysonics,.......)  Maintenance and calibration of the control valves ( Pneumatic, Part turn, MOV, NRV,..... ) of Weir Blackborough, Flowserv, Bray, Airtorque, Copes-Vulcan, Valtek, Masoneilan, Auma matic,......  Experienced in flowmeters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable area ) of ABB, Rosemount, Krohne,+GF+,.....  Designing, Implementing and Commissioning of new control loops as per site requirements.  Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart  Familiar with engineering standards ISA, IEEE, ASTM, NAMUR, ASMI , ANSI , NEMA , IEC  Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM  Technical Support for the instrumentation team.  Experienced in the field instruments and control systems procurement activities  Spares balance investigation and inventory control for all instruments’ spare parts  Excellent communication interpersonal skills. Educational Qualifications: 1997........ Bachelor of Control Systems and Electronics Engineering, Mansoura university......... Egypt 2000........Higher studies Diploma in Artificial Intelligence System, Mansoura university...............Egypt Page 1 of 3 Organizational Experience Organization: Kindasa Water Services company, Jeddah – Saudi Arabia Duration: Jan 2011 till now Designation: Instruments and Control Systems Engineer Project Description: Sea Water desalination plant 40,000 m3/day desalinated water, SWRO technology, Booth Welsh Automation. Responsibilities:  Leading a team of four instrument technicians  Reporting periodically to Maintenance Manager; preparing KPI, PM and CM reports.  Troubleshooting the totally integrated automation TIA from Siemens ( DCS PCS7 v6.0 + PLC simatic S7 400 + SCADA WINCC ) software and hardware .  Troubleshooting of redundant Profibus communication between 30 RTUs and the contrl room ; comprising of 2 pair hot/standby controllers and pair of dual redundant scada servers.  Planning required upgradation for instruments to achieve production quality and cost minimizing.  Maintenance and calibration of pneumatic control valves ( Weir, Flowserv, Blackborough,..... ) and part turn actuated valves ( Bray, Airtorque,Flowtek,..... )  Maintenance and calibration of different analyzers : Conductivity, Chlorine, PH, SDI, Redox, Turbidity, TDS ( Endress and Hauser ) and IMA/FL200 Oil in water  Maintenance and calibration of flowmeters ( electromagnetic, orifice plate, variable area, turbine, ultrasonic.....
) of ABB, Krohne, Rosemount, +GF+, Polysonics  Maintenance and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress & Hauser, ABB ,.....) and Monitran vibration transducers.  Calibrating and adjusting the dosing pumps (Prominent)  Cathodic protection testing for five 10,000 m3 reservation tanks  Ensure Spares balance and inventory control for all instruments’ spare parts * * * * * * * * * * * * * * * * * * * Organization: RIO Trading company, Jeddah – Saudi Arabia Duration: April 2007 to Dec 2010 Designation: Instruments Engineer Project Description: Mixing plants including Asphalt plants 300 T/h Wuxi Xuetao - China, and Concrete plants 200 m3/h CUOGHI - Italy; automated by PLC- SCADA system. Responsibilities:  Involved in the mixing plants erection works, commissioning and maintenance.  Troubleshooting of PLC system ( Siemens simatic S7 300 ) and faults diagnosis .  Programming of plant microcontroller  Calibrating of weighting systems including load cell 15 ton capacity  I designed, implemented and commissioned automatic control systems for adding polymer to asphalt batches; and chemicals to concrete mix.  Planning and implementing additional control loops as per site requirements  Maintenance & calibration of Dryer temperature control system ( Honeywell )  Strong background in motor defects, softstarters, drives, star/delta starters, VFD, MCC  Printed circuit boards PCB Repairing, Designing, and Modifying . * * * * * * * * * * * * * * * * * * * * * * Page 2 of 3 Organization: Delta Fertilizers and chemical industries company, Mansoura - Egypt Duration: Dec 1999 to April 2007 Designation: Instruments Engineer Project Description:18 MW Steam Turbine Power Plant, Rolls Royce – supplying power to the factory. Responsibilities:  Leading a team of five instrument technicians  Programming PLC (GE Fanuc series 90-30 ) by Ladder Diagram, and hardware troubleshooting  Basic troubleshooting of SCADA (IFIX/GE – ICONIX ) and DCS CS3000 Yokogawa  Maintenance & calibration of transmitters PT, LT , TT , DPT ( Rosemount, Yokogawa, Vega, Foxboro, Honeywell......)  Maintenance & calibration of turbine governer control system, and Bently Nevada 3500 measuring system ( Acceleration, Velocity, Thrust, Vibration,......)  Maintenance and calibration of pneumatic control valves (Blackborough, Copes-Vulcan, Valtek, Masoneilan) and motorized valves ( Auma matic & Auto tork )  Maintenance and calibration of orifice plate flowmeters ( Rosemount ) & gas turbine flowmeters  Configuring of stack sampler set , and O2 analyzer  Trainer at the company training center Training  SCADA Summit, attending, ...................Dammam; March 2012  Water desalination technology, trainee,................ Jeddah 2011  ISO 9001 : 2008 standards, trainee,..................... Jeddah 2011  DCS Centum CS3000 YOKOGAWA ,trainee,.. Mansoura 2007  Control Valves ,trainee,.................................... Mansoura 2006  Computer sciences ,trainer,............................. Mansoura 2003 IT Skills  Operating systems : Windows XP, 7,NT, 2008 Server  Programs : Office Tools , AutoCAD  Internet : Very good  Programming languages : Visual Basic, C++  PLC Programming : Ladder Diagram  Control Programs : PCS7 v6.0 Siemens & CS3000 DCS, WINCC& IFIX SCADA  PC Networking : Very good  PC HW maintenance : Experienced Languages English: Fluent; read, write and speak Arabic: Mother tongue Availability Earliest start date: Given 3 weeks notice ___________________________________________________________________________________________________ Declaration I hereby declare that all information stated above are true to the best of my knowledge. (Last Updated on April 2012) Page 3 of 3


1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.