Objective :
A position with job stability, which offers good advancement & effective utilization of knowledge, Work-related experience, acquired capabilities and with the opportunity for professional growth in a useful and successful productive manner with the support of my superiors.
Profile :
An experienced Welding Inspector with 9+ years experience in petrochemical, oil & gas plants.
Professional Experience :-
1. Organization : Velosi Certification Services LLC,
Client : AD GAS, Das Island,
Project : Shutdown Project.
United Arab Emirates,
Position : QC Inspector,
Duration : Aug 2010 to Oct 2010.
Duties and Responsibilities :
Handling Inspection of various Stages in Piping, Structural and Pressure vessels.
Familiar with the construction Drawing, General Arrangement Drawing, Piping and Instrument Diagram and Isometric Drawing.
Reviewing of test procedure, welding procedure specification, PQR, WQT method and statement.
Witness and procedure qualification testing and qualified welder in both the manual P automatic welding.
Checking the According criteria as per codes and process and standard specification (ASME B 31.3, AWS D1.1, and API1104).
Preparation of NDT test plan and Inspection test and plan.
Preparation of Request and Reports for the clients and Co-ordinate with the client representatives.
Preparation of Inspection Report and Final Document for Dossier.
Preparing test packages as per component list and line class.
Inspection of the Pre Heating, Interpass temp and Post weld Heat treatment.
Check the Essential Parameter’s as per the WPS Requirements and Quality Procedure.
Visual and Gauge Inspection in Fit-up before and after welding.
To check the Proper Electrodes are used for the Respective Materials and the temp has been maintained as per the Electrode Manual.
Review and According of Minimum certificate for Materials and welding Consumables.
Qualifying the welders as per the Project Requirement.
Repair percentage Analysis and tool box talks. For welders to control Repair percentage.
Verification that Dimension and alignment tolerance of the Piping Systems are as per Constructs Specification.
Witness of the Hydro and Pneumatic test.
The Review Mandatory of Qc Activity Steps for ITP .
2. Organization : Excel Inspection services:
Sidco Industrial Estate, Ambattur,
Chennai-600098.
Position : QC Inspector,
Duration : December 2009 to July 2010.
Duties and Responsibilities :
Interpretation of RT films and witness NDT activities PT, MT, UT, RT and preheat & post weld treatment.
Witnessing the both destructive and non destructive Testing.
Positive Material Identification Test, Using X-MET 300TX.
Witness of Welder Qualification Test.
Corrosion Survey & Thickness Gauging of in Service Piping & Pressure Vessels.
Inspection at various stages like Fit up, Dimensional check, Welding check,
Carry out the Material inspection for Pipes, Fittings, Valves, Plate and Welding Consumables etc., and review the MTC.
Through Knowledge of Isometric Drawing of Oil, Gas Plants.
3. Organization : Dodsal Engineering and Construction Pvt. Ltd:
Ruwi, Sultanate of Oman,
Client : Petroleum Development Oman LLC.
Project : Qarn Alam Steam Project,
Position : QC Inspector,
Duration : Sep 28th 2009 to Nov 23rd2009.
Duties and Responsibilities :
Preparation of Material Traceability, Weld Map, Inspection Reports and Hydro Test Pack.
Inspection of Structural alignment and Bolt tightening.
Inspection at various stages like Fit up, Dimensional check, Welding check, Hydro test &Pneumatic test Witness, PWHT, Surface Preparation and Coating.
Co ordination with third party inspectors, surveyors and clients.
Inspection of SS & CS pipelines and structures fabrication AWS D.1.1 flow lines.
Review of contacts documents such as scope of work project specification and applicable codes.
Conducting welding procedure specification (WPS) test and preparing procedure qualification records (PQR).
Witness of PWHT/NDT and PQR lab.
Vendor assessment and inspection of materials consumables and equipments.
Interpretation of RT films, Evaluation of VT, MT, PT, UT, reports and witnessing of destructive testing of specimens.
Inspection of fabrication, Welding, NDT, coating and safety standard on site.
Inspection of welding consumables and equipments, checking of storage and baking of electrodes verifying all welding parameters according to approved WPS.
Inspection on welding (check joint fit up, seam orientation, plate or pipe no, heat no, alignment, visual inspection & numbering and preparation of Inspection reports & NDT progress chart for storage tanks & pipelines.
Well conversant with various welding processes like SMAW, GTAW SAW, GMAW, and FCAW etc.
Witnessing of hydro test & pneumatic test of tanks, pressure vessels and preparation of test certificates.
Storage tanks plate fabrication & rolling inspection.
Storage tanks section fit up inspection as per applicable code/specification.
4.
Organization : Echno Valves Industries:
Sidco Industrial Estate, Ambattur,
Chennai-600098.
Position : QC Engineer,
Duration : March 2009 to Aug 2009
Duties and Responsibilities :
Incoming Material Inspection (ValveBody, Wedge, Seatring, Bonnet, Stud).
Review Purchase Order, DataSheet, Drawing, Quality Plan, MaterialTest certificates, Valve Test Certificates.
Witnessing Hydro and Pneumatic Test. (Body Hydro, Backpressure test, Seatringtest, Seat ring Pneumatic Test).
5. Organization : Inspecta International Company:
Doha, Qatar.
Position : QC Inspector,
Duration : Dec 2006 to Dec 2008.
Our Company was in Contract With :
Qatar Petroleum Refinery.
Qatar Vinyl Company.
Qatar Gas II.
Duties and Responsibilities :
2007 Feb 45Days Shutdown in Qatar Vinyl Company Ltd.
2008 May 30Days Shutdown in Qatar Vinyl Company Ltd.
Carry out the Fit-up inspection, dimensional inspection and weld visual of Piping, Storage Tanks, vessels and structural works.
Interpretation of RT films and witness NDT activities PT, MT, UT, RT and preheat & post weld treatment.
Carried out UT Lamination checking, thickness measurements and weld scan on various components of various rigs.
Witnessing the both destructive and non destructive Testing.
Positive Material Identification Test, Using X-MET 300TX.
Witness of Welder Qualification Test.
Corrosion Survey & Thickness Gauging of in Service Piping & Pressure Vessels.
Carry out the Material inspection for Pipes, Fittings, Valves, Plate and Welding Consumables etc, and review the MTC.
Reviewing of documents for Pressure Test and Final Dossiers.
Familiar with ASME, AWS, API & BS Codes & Standards.
Witnessing of Hydro Test.
Through Knowledge of Isometric Drawing of Oil, Gas Plants.
6.Organization : GB Engg. Enterprises Pvt. Ltd:
Tiruchirapalli, Tamil Nadu, India.
Position : NDT Coordinator and Technician,
Duration : Jan 2004 to Oct 2006.
Duties and Responsibilities :
Radiography in Pressure Pipe lines ¾”; ½” carried in superimpose Technique.
Radiography in 2” Coil carried in Double wall double image.
Radiography in 3,4,6,8,10,12,26” carried in Double wall single image
Radiography in Pipe lines in profile short.
Thickness survey of Pipe lines, vessels External and Internal.
Magnetic particle test in External gladding bracket welds.
Interpretation of RT films and witness NDT activities PT, MT, UT, RT.
7. Organization : Lam Hong Leong Aluminum Pvt. Ltd:
Singapore.
Position : QC Inspector,
Duration : Dec 2000 to Dec 2003.
Duties and Responsibilities :
Expertise in preparing various Inspection reports, Punch Lists, NCRs and process procedures.
Leading, monitoring and motivating Inspection team in their relevant field of inspection by conducting meetings and trainings and monitor their performance as per project requirements.
Procurement of raw material and to check mill test Certificates.
Checking the heat number and WPS
Preparation of WPS and PQR and to conduct welder qualification
Inverted material record keeping
Visual inspection of erected equipment and correcting the alignment of equipment
Visual inspection of fit up and weld during fabrication
Visual inspection of erected piping like vertical, Horizontal
Preparation of hydro test package and witnessing the same and carry out the hydro test in front of client authorized person
Completion of final report and submitting to client for review and also to my superior.
Co-ordination with NDT Technician.
Checking the insulation (both hot & cold)
8. Organization : Anand Engg. Enterprises:
Client : M / S. Bharath Heavy Electricals, Limited,
Tiruchirapalli, Tamil Nadu, India.
Position : Supervisor,
Duration : Jan 1999 to Oct 2000.
Duties and Responsibilities :
Carryout Raw Material Inspection and Prepare the Report.
Performed Visual Welding Inspection and Audits during routine repair and New Construction.
To check the Welding consumables of electrodes and filler wire type, size and condition.
Stage wise inspection of piping.
Stage wise inspection of structural items.
Conduct the MPT, DPT & PWHT.
Familiar in interpretation of Radiography Film.
Knowledge to prepare WPS & PQR
Knowledge of painting inspection.
Familiar to prepare system dossier.
Academic Qualification :
Diploma in Mechanical Engineering (1995 to 1998)
Certification :
AWS – CWI Certificate No. 09014781(Date of Expiry : January 01,2012)
ASNT LEVEL II in
Radiographic Testing
Ultrasonic Testing
Magnetic Particle Testing
Dye Penetrant Testing
Computer Knowledge :
Operating System : Windows 95, 98 & Dos
Package : AutoCAD Release 13, 14 & 2000
MS – Office 97 & 2000
Date :
Place :