Welcome Guest

IT / Computer2 >> Telecom/ RF/ BMS/ BTS/ BSS Engineer 
Signalling Engineer Resume Sample, Experience : 8 years

Sponsored Links:
    

Biodata

Name of the Candidate:[Private]
Name of the Post Applied:Signalling Engineer
Job related skills / software:Testing and commissioning of CBTC Signalling equipment’s, Performed test on Point Machines, Main Signals, Repeater Signals, PESB and tests involving STC to NSTC data communication
Category:IT / Computer2
Sub Category:Telecom/ RF/ BMS/ BTS/ BSS Engineer
Years of Experience:8 years
State:Maharashtra
Gender:Male
Salary Expected per Month(Rs):50,000 to 60,000
Highest Qualification attained:B.E. / BE : Bachelor of Engineering
Major / Specialization:Electronics and Communications
Email Id:[Private]
 
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :

    

Anup Kumar Ashok Dixit
Signalling Team Leader
PO Box 94392, Dubai, UAE
Email : anup_dixit1985 AT rediffmail.com
Ph. : +971 552368051

Objective  :
To gain a dynamic and challenging role in the area of railway signalling that will offer the best opportunity for further development of my abilities, skills and knowledge in an established firm with long term career growth possibilities.

Summary  :
** Dubai Metro is the longest (74.8 Km) automated driverless system in the world, which contains 47 station, three train depot one operation control centre, one backup operation control centre and 79 trains.
** I am responsible for preventive and corrective maintenance of CBTC (Communication based train control) SELTRAC S40 system (Contains SMC, VCC, STC/PDIU, VOBC and Inductive loops) for signalling System and other modification activities.
** Coordinating and providing technical support to PSD/DEQ/RSK/COMMS and Track Team during modification activities and fault rectification.
** Associated with providing training, support, guidance to newly recruited ATC staff.
** System assurance on the engineering and maintenance of automatic train control system,
** Assist ATC Engineer and Manager in preparation of engineering and maintenance plans, procedures and work instructions.
** Responsible for ensuring the compliance of company safety policy,
** Procedure & standards within the section of ATC.
** Working as a Safety Critical Assessor for the ATC maintenance unit. Leading a team of 24 staff {FLRT (First Line Response Technicians) and Technician}.
** Supervising preventive and all level of corrective maintenance, renewal and minor system modification works pertaining to ATC system.

Professional Qualification  :
** B.Tech in Electronics Engineering
** Diploma in Industrial Electronics (3 years)
** Prince2 foundation and practitioner certified

IT Skills :
MS Office (Word, MS Excel), MCSE, CCNA, Firewall Specialist

Training / Qualifications :
** Automatic Train Control system (ATC) equipment maintenance training (Central, Wayside, On-board, Switch Machine and WODS)
** Automatic Fare collection system (AFC) equipment maintenance training (Gates, Ticket Vending Machine and Ticket Office Management)
** Training for safety critical communication in railway environment
** Basic of Rolling Stock ** Broad Band Radio System (BBR) for On-board CCTV Coverage
** Advanced First Aid At Work’ conducted by ‘Dubai Ambulance’
** Training on presentation and management Skill.
** People Management Training
** Assessor Training
** Line Side and Non Line Side Person In-charge Training
** Accredited Technician - Institution Of Rail Signalling Engineers (IRSE),UK

Project Summary  :
Team Leader From Jan 2011 to July 2011
Project  :- Testing and commissioning of CBTC Signalling equipment’s - Green Line Serco Dubai Metro

Project Responsibilities :
** Perform Validation (V&V) of interlocking circuits
** Performed test on Point Machines, Main Signals, Repeater Signals, PESB and tests involving STC to NSTC data communication
** Performed On-board & Trackside ATC programming for ATP and ATO.
** Perform On-board Dynamic test with all Trains on Main line and Test Track
** Responsible for interface testing between ATC,RSK,COMMS,PSD,DE
** Instructed the team for testing and troubleshooting activities.
** Daily morning meeting with Interface Manager and Discussing the failures to avoid in future Team Leader From July 2016 to Jan 2017

Project  :
Signalling Monitoring system CONMON (Condition monitoring)

Project Responsibilities :
** Did installation and commission with Voestalpine signalling Fareham ltd as a project supervisor from Serco Dubai metro.
** Did signalling interface connection and carried out work as per installation plan and procedure with contractors.
** Did all required testing before commissioning and pre launching of CONMON system.

Team Leader From Feb 2017 to July 2017
Project  :- System and subsystem level Testing and Verification - Dubai Expo route 2020 metro line project

Responsibilities :
** Co-ordination with other stakeholders for interface related issues.
** System and subsystem level verification and validation (ATS, ATP and VOBC)
** Preparing Lab setup.


Working with testing tools like SLMD, ATS simulators for engineering and validation

Work Experience  :
May 2012 to present Serco limited (Dubai branch) Team Leader - ATC & Systems, Dubai Metro

Project Responsibilities :
** Supervise and monitor the train movement in the depot and mainline through ATS
** Co-ordinating with other Depts. for On-Board Variable upload and testing with Thales and MHI
** Co-ordinating and follow-up with equipment manufacturer for Spares and plan PM accordingly
** Testing of Spares using Simulators and In-house testing bench
** Reviving the Technical Documents based on Current Faults Scenario
** Preparing the Investigation Report using Playback ,System Logs and ATS Simulator for ATC fault Rectification
** Liaise with Duty Manager, Train Controller and Depot Controller in case of ATC failure and provide
** Suggestion and solution for the rectification of fault
** Safety critical communications During Line Side and Non Line Side PM and CM Activity , renewal and minor system modification work for ATC system to ensure optimum life cycle costs including Root Cause Analysis (RCA) reports for major failures.
** Maintenance Planning and Control for preventive and corrective maintenance of CBTC (Thales SELTRAC S40 system) with ATS,VCC (ATP), Interlocking System, On-Board Signalling system,
** Point machine and Inductive loops, Broad Band Radio System (BBR) for On-board CCTV Coverage, fibre network for signalling system and other modification activities.
** Validating and Verifying the engineering and maintenance plans, procedures and work instructions.
** Interface documents and Risk assessment for various ATC maintenance activities.
** Responsible for ensuring the compliance of company safety policy, procedure & standards as well as
** Competency management system for each Staff within the section of ATC.
** Co-ordination with other stakeholders for interface related issues.
** Associated with providing training, support, guidance to newly recruited ATC staff
** Managing a team of 25 staff {FLRT (First Line Response Technicians) and Technicians}

July 2009 to March 2012 Serco limited (Dubai branch) FLRT (First line response technician), Dubai Metro

Project Responsibilities :
** Give first line service response to the faults or incidents, which may affect the service, in ATC (Automatic train control) system of Dubai metro under the guidance of ATC engineer and submit fault report and escalate the issue to contractor for further diagnosis if required
** Co-ordinate with contractor for maintenance of equipment under warranty
** Assist maintenance team in PM of ATC equipment.
** Attend Automatic Fare Collection (AFC) equipment’s faults and perform primary fault analysis and troubleshooting.
** Also perform primary level maintenance as per the guidance from AFC team leader

May 2007 to June 2009 Jabil Circuit India Pvt Ltd. Pune, India Testing Engineer
** To maintain Documentation required for ISO standards such as Visual Aids, Work Instructions, Process Flow control for all Tests related areas.
** Installation and validation of new process flow for building test station.
** Team management with set goals, targets, processes and procedures.
** Design and support the build and maintenance of Testers, Fixtures, to monitor and contribute to the improvement of Test Yields,
** Test Efficiency, Tester Intermittence, Electrical Defects, and overall Tester performance.
** Installation & maintenance of Centralized RF cable signalling system.
** Responsible along with the customer to develop the test process and Test Specifications, which ensure the customer receives only product that meets their requirements.
** Product work on Set Top Box : - EchoStar (Multimedia STB) - Class 1 Product With different models.

Achievements :
** Implemented remote automation in the testing line.
** Implemented the DUAL CLT (Customer Level tester)
** Installed 120 testers within a month.
** Awarded For Outstanding Contribution and Best Performer in Jabil in 2008
** Implement the cycle time reduction project.
** Awarded for outstanding performance in ATC and System in 2011.
** Awarded for outstanding performance and preparation of New Year Event in ATC and System in 2015.

Date  :
Place  :

Notes

1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.