Welcome Guest

Design Engineering >> Product Design Engineer 
Product Design Engineer Resume Sample, Experience : 4 years

Sponsored Links:
    

Biodata

Name of the Candidate:[Private]
Name of the Post Applied:Product Design Engineer
Job related skills / software:Development and Programming of DCS, PLC, HMI/SCADA, VFD, SERVO, RTU , operation & maintenance for process, conveyors, utility automation and soft starters, knowledge of SCADA Software design
Category:Design Engineering
Sub Category:Product Design Engineer
Years of Experience:4 years
State:Maharashtra
Gender:Male
Salary Expected per Month(Rs):30,000 to 40,000
Highest Qualification attained:B.E. / BE : Bachelor of Engineering
Major / Specialization:Electronics & Communications
Email Id:[Private]
 
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :

    

RATNADEEP PRABHAKAR ANKUSH
Indraprasth bulding,Null stop,karve road, Pune-52.
Mob.No-9922571969
Email - rtndpnksh AT gmail.com/ ratnadeep.ankush AT yahoo.in

CAREER OBJECTIVES :
To work in creatively challenging environment and utilize efficiently my technical ability and skill in  Engineering graduation towards achieving the goal of the organization.

WORK EXPERIENCE :
1) NEOSYS EQUIPMENT PVT. LTD, PUNE
Project  :- Installation and wiring of instruments via PLC DCS SCADA 4th Dec 2015 – Till date
Designation  :- Project Engineer
Location  :- Premier Floor to Roof materials Pvt Ltd, Kurkumbh MIDC, Pune

Project  :- WET FUEL GAS DESULFURIZATION system for1X500 MW Power Plant
Designation  :- Project Engineer
Location  :- NTPC, Vindhachal, Singrauli, MP
Client  :- ALSTOM INDIA LTD. 21st July 2014 - 30th Nov 2015

I am associated with the Erection activities of WFGD System being executed at NTPC-Vindhyachal Stage-V (Unit#13).I am attached with M/s.Neosys Equipments, Sub-Contractor of Alstom India Ltd., working as a Project Engineer.

I am gaining experience in the following areas :
** Achieving Construction Activities like Checking Civil foundation, Site Coordination, Planning, budgeting, costing, Client-meeting, Supervision.
** Knowledge of QA/QC procedures such as protocol for fit up and alignment of tanks and structure.
** Handled Manpower of 2 Trainee Engineer, 3 Supervisor and 50 workers.
** Calibration inspector for all machines and tools.
** Crane incharge of 3 Hydra and 150 MT Crane.
** Responsible for preparing technical reports for future reference and update the same to the customer.
** And aware of maximum safety Guide line during site work.

2) VIJAYESH INSTRUMENTS PVT. LTD. PUNE. 1st March 2013 - 12th July 2014
Designation :- Service Engineer

Field work :-
** Furnace Temperature Mapping for any heat treatment work (it is very vital that it is done for  Temperature Uniformity Test of any type of furnace) in Bharat Forge ltd, Bharat gears ltd, Ksb pumbs ltd, Kirloskar ferrous india ltd, Hospet steel ltd, Kalyani carpentry ltd, Nashik technomet pvt ltd.
** Installation of Argon gas purifier in Bhabha Atomic Research Center and in Jindal Fitting ltd.
** Handled process control of whole furnace in Heat treatment, Forging, Casting companies
** Handled PLC’s, Control panel, HMI.

Office work :-
** Designing Control panels for furnaces and also their Installation.
** Assembly, installation, repairing of all types of Thermocouples, RTD’s and their respective measuring instruments : Indicators, Controllers, Scanners, Data loggers.
** Assembly and installation of Argon gas purifier for spectrometer
** Calibration of instruments in Pressure, Thermal, Electro technical Measurements.

TRAINING AND CERTIFICATION :
“AUTOMATION ENGINEERING (PLC & SCADA) FROM COEP, PUNE”
** Two month certification course and training from college of engineering pune dated 6th august to 28 sept 2012.
** Allen-Bradley used with Rockwell Automation

Automation Project :Designed Fully Automated Beer Factory and show the working on SCADA screen .

AREA OF INSTREST :
** PROCESS CONTROL AND CONTROL NETWORK
** PLC, SCADA, HMI, DCS.

ACADEMIC QUALIFICATION :
1.B.E Electronics DMIETR, Wardha June 2012 RTMNU Nagpur 57.05%
2.


Intermediate St.Mary’s Convent, Chandrapur Feb 2008 Nagpur(div. board) 65.33%
3. S.S.C. St.Mary’s Convent, Chandrapur March 2006 Nagpur(div. board) 70.53%

B.E PROJECT WORK :
“SATELLITE TTC AND GROUND DATA COMMUNICATION”

Abstract :
This paper presents the Satellite TTC & Ground Data Communication; the main aim of thisproject is to design Deep Space Network or DSN and Base Transceiver Station orBTS.

The Deep Space Network, or DSN, is an international network of large antennas and  Communication facilities that supports interplanetary spacecraftmissions, and radio and radar  astronomy observations for the exploration of the solar system and the universe.

PERSONAL PROFILE :
Father’s Name  : PRABHAKAR.D ANKUSH
Mother’s Name  : GEETA P. ANKUSH
Date of Birth  : 30th sep 1990
Marital status  : Unmarried
Hobbies  : Playing football, music, photography
Languages Known  : Marathi, Hindi, English.

DECLARATION :
I hereby declare that the information furnished above is true to best of my knowledge.

DATE :
PLACE : PUNE
 

Notes

1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.