CH. ANUSHA
Email : chanusha8993 AT gmail.com
OBJECTIVE :
Seeking a Challenging and dynamic position in the field of VLSI in an esteemed organization where my skills and abilities can be put to their best to achieve both personal as well as organizational objectives.
EXPERIENCE :
2.8 years working experience as a VLSI Engineer in VLSI Department with Tie Technologies PVT LTD.
ACADEMICS :
B.Tech (E.C.E), ANU College of Engg, GUNTUR, Nagarjuna University, 2010-2014, 82.7
Intermediate Public Examination, NARAYANA Junior College, VIJAYAWADA, 2008-2010, 94.2
SSC, GEETANJALI VIDHYALAYA High School, Saroornagar, Hyderabad, 2007-2008, 83.83
SOFTWARE SKILLS :
Programming Languages : C, C++, and Core Java.
Operating Systems : Windows 7, 8 – Server -2008/12
Technologies : .NET, SQL, HTML4, MSBI.
HARDWARE SKILLS :
HDLS : VHDL, Verilog
TOOLS : Modelism, Leonardo Spectrum, ORCAD, MPLAB, Xilinx, Kiel, MATLAB
MICROCONTROLLER : 8051, Atmel 89C51, PIC 16F876A, PIC 18F4550
MICROPROCESSOR : 8085, 8086
PROTOCOLS KNOWN :
PCI, USB, IEE 802.3, CAN, 12C, SCI and SPI
ROLES AND RESPONSIBILITIES :
** Developed a standalone Pulse Oximeter, Designed Circuit, PCB layout using ORCAD.
** Developed firmware for PIC16F876A and PIC18F4550.
** Developed USB Interface for PIC 18F4550
** Verification of DAU and BIU blocks.
** Design Back-Off algorithm for Ethernet MAC in VHDL.
** Design of the CRC block in VHDL.
** Wrote test bench for both the modules.
CO-CURRICULAR ACTIVITIES :
** Participated in AFOSEC 2K12 at V.R. Siddhartha Engineering College, Vijayawada.
** Attended for a one day workshop on “Design & Installation, Relay Co-ordination of H.V.Substations” conducted by Vidhyuth Association at Shree Institute of Technical Education, Jan 2013.
** Volunteered ANUSODHANA 2K10, at A.N.U College of Engineering & Technology, Guntur.
** Industrial Training at EFFTRONICS SYSTEMS PRIVATE LIMITED on”STUDY OF ACCELEROMETER CHIP” from May2013 to Jan2014.
** Got trained on basics of VLSI like Design/Schematic of circuits, PCB Design at “RADIX MICROSYSTEMS” from Aug2014 to Dec2014.
EXPERIENCE :
VLSI :
** Experience in the design and development of Digital and Embedded board design
** Good knowledge on design and development of Analog Boards.
** Involved in complete Board design cycle using FPGA.
** Good knowledge at circuit trouble shooting, rework and high speed PCB design techniques
** Involved in developing architecture design, schematic capture as per the company specification, Component selection and Net list review
** BOM maintenance, component specification, Software development manual, Test Procedures.
** Executed tests using sophisticated instrumentation such as Debugger, In-circuit Emulators, Logic Analyzer, Digital and Storage oscilloscopes and rework system (soldering station)
** CPLD, FPGA and ASIC based board design.
** Bare Board Testing, Board bring-up, Trouble shooting, etc.
** Hardware debug (working with software engineers to resolve functional issues in lab)
** Definition of interface requirements for software team.
** Experience in writing test cases and test benches for the given logic.
PROJECT :
Title : Study of Accelerometer Chip
Role : Analysis
Description :
This study project deals with a system that gives the velocity, acceleration of a moving body at different instants of time during a marathon. For this purpose there are many manual methods as well as advanced methods. Both the manual methods and advanced methods have their own advantages and disadvantages like accuracy is less in manual methods whereas the cost of equipment that use the advanced methods is very high.
The main objective of this project is to reduce the cost of the system with accurate output.
For this purpose we can use different types of sensors like force sensors, accelerometer sensors. The study of Accelerometer chip which has a wide range of applications was our prior choice. Use of accelerometer chip requires a micro-controller which can be interfaced through various methods like I2C interface, ISP, through GPIO pins etc which process the data from the sensor using g-calculations.
RESPONSIBILITIES :
** Basic study on the requirement like various positions in running during the marathon.
** Study on working of existing Accelerometer chip which is presently used to Railway Signaling.
** Study on G-calculations.
** Software development of the Accelerometer Chip.
** Tested the communication process of the Accelerometer Chip during the tracking of the train.
** Studied communication process such as I2C, ISP.
** Relevant conclusions are made after the study of chip regarding the suitability of chip.
PROJECT :
Title : Photoplethysmography (PPG)
Role : Analysis and developer
Languages Used : Embedded C/Kiel
Description :
This project deals with a monitoring system that gives heart rate of a patient. Generally for this purpose we use medical devices like Electrocardiography(ECG), portable device or any other commercial heart rate monitor which normally consisting of a chest strap with electrodes. Despite of its accuracy, somehow it is costly, involve many clinical settings and attention of medical experts for continuous monitoring. For a patient who has already diagnosed with a fatal heart disease, their heart must be monitored continuously. This can be done using a technique called Photoplethysmography (PPG).
In this technique a light source is used to observe the electrical pulses produced during the functioning of heart which gives the heart rate. This electrical signal is processed using 8052 micro controller to determine the heart beat rate per minute. Then it sends SMS alert to the mobile phone of medical experts or patient’s family members, or relatives via SMS. Thus, doctors can monitor, diagnose and also alert the family members to quickly attend the patient when fluctuations of heart are abnormal.
RESPONSIBILITIES :
** Experience in the design and development of Digital and Embedded board design
** Good knowledge on design and development of Analog Boards.
** Involved in complete Board design cycle using FPGA.
** Good knowledge at circuit trouble shooting, rework and high speed PCB design techniques
** Involved in developing architecture design, schematic capture as per the company specification, Component selection and Net list review
** BOM maintenance, component specification, Software development manual, Test Procedures.
** Executed tests using sophisticated instrumentation such as Debugger, In-circuit Emulators, Logic Analyzer, Digital and Storage oscilloscopes and rework system (soldering station)
** CPLD, FPGA and ASIC based board design.
** Bare Board Testing, Board bring-up, Trouble shooting, etc.
** Hardware debug (working with software engineers to resolve functional issues in lab)
** Definition of interface requirements for software team.
STRENGTHS :
** Self confident.
** Interested to work in a Team, quick leaner.
** Adaptability.
PERSONAL DETAILS :
Name :ANUSHA CH
Husband’s Name :Durga Prasad J
Nationality :INDIAN
Marital Status :Married
Languages Known :English, Hindi & Telugu
Hobbies :Cooking, Listening music, Learning new things
DATE :
PLACE :