To seek challenging position of strategic importance in the corporate environment by making a contribution to the organization to the best of my abilities and to sharpen my own skills in the due course.PROFESSIONAL QUALIFICATION
Diploma in Instrumentation and Control engineering with 72.05 % in 2000 from government polytechnic palanpur,dist-Banaskantha, Gujarat .
B.Tech in Electronics and Telecommunication from Rajasthan university in Dec. 2010. through Correspondance
I am pursuing MBA in PROJECT MANAGEMENT in first semester through Sikkim Manipal University.TOTAL EXPERIENCE:
My total experience is 11 years. I worked with DCS and PLC of different types of models. Knowledge of refinery and process engineering, operation and also with refinery project execution.
Pre-commissioning & Commissioning Phase
Instrumentation & Control System erection & commissioning.
Erection, calibration & testing of field Instruments and loop checking of all field instruments.
Providing all support for safe & successful commissioning.
Participate in equipment trial runs/ equipment start ups.
Assist in preparing the checklists for Instruments, panels taking over, pre-commissioning & commissioning
To make ready all tools & tackles required for commissioning & steady state of plant.EXPERIENCE SUMMARY:
** LARSON & TOUBRO
1. With ADANI POWER LIMITED
** Instrumentation Engineer
** Nov. 2010. to till date
Working at Adani powe project as Instrumentation engineer for construction work of B.O.P, Unit -9, and CCTV.
2. With CAIRN INDIA for MPT in Rajasthan
** Instrumentation engineer
** Sep.09 to Nov.2010
Worked at Barmer as in-charge instrumentation for MPT Well pads and MPT.
3. With Reliance Petroleum Limited ( Jamnagar Export Refinery Project )
May 2008 to Aug. 2009
I had Worked in L&T ( ECC Division ) as a Project Lead Engineer ( Instrumentation ) at Jamnagar for CRUDE 1& CRUDE 2.Responsibilities on the job:
1) Study of the Plan Layout of the Plant.
2)Finalization of the Cable route from the Field Instruments to the Control room and JBs.
3)Installation of different Instruments(PT ,DPT,TT etc) at their respective locations.
4)Hookups for the Instruments as per the Approved Hook up Drawing.
5)Installation of transmitters Like Thermal Mass FM, Ultrasonic FM,Guided Wave Radar etc
6) Knowledge of the Piping job for the Installation of the Orifice Plate, Senior Orifice ,Thermal
Mass Flow Meter and Magnetic Flow Meter.
7) Laying of different types of cable.
8) Material Management
9) Material Reconciliation of crude-1 and crude – 2.
10) Analyzer erection.
11) Hydro test of impulse line.
SAFETY & QUALTY AWARNESS AT RELIANCE
** Work permit – different type
** Hazardous Area Classification
** Hydro test traing from Reliance and L& T.
** Total quality management taken by L & T.
** Followed quality rules and systems during project given by Reliance.
** ABB Ltd
** Project Lead Engineer
** Feb. Sponsored links :
2007 to May 2008
I had worked in ABB Ltd as Lead Engineer –Projects, for the project titled “Enterprise Wide SCADA for Production and Drilling” for observation of the various parameters for the well production, the client for the project is Oil and Natural Gas Corporation (ONGC, Ahmedabad.
** Banas Dairy
** Instrumentation engineer ( Maintenance – Utility )
** March 2001 to January 2007
I had worked as a Instrumentation and Control engineer in Banas Dairy, palanpur, Gujarat from March-2001 to Jan-2007MY WORK PLACE:
Banas – 2 plant is a very recent project L & T and I.D.M.C. and is state of art dairy with the latest technology / Instrumentation. It is a continuous process plant, using
SCADA based PLC system. Equipped with smart field instruments the plant is automated by LADDER LOGIC in the controller.MY JOB EXPERIENCE:
** Ensuring smooth operation and maintenance / calibration of field instrumentation.
** plant and Compressed air section, operated by PLC and other state-of-the-art technologies. Knowledge of motor control system.
** Allen Bradley & L & T PLC Hard ware system.
** Knowledge of Basic Electrical Systems.
** Networking of PLC with the SCADA system
** Worked during project erection and commissioning stage of the same plant with Project team of L&T Niro, L&T Automation, Allen Bradley-Rockwell Automation, IDMC, L&T etc.
** Work experience include Installation and Commissioning of PLC based operated.
Refrigeration plant of 790 TR capacities
** Work experience include Installation and commissioning of Boilers, water treatment plant, Compressed air system.
** Implementations of Energy conservation initiatives suggested by energy survey.
** Also attend training of two days of ROCKWELL AUTOMATON on SLC 5/04 PLC model.DECLARATATION
I hereby declare that all the information furnished above is true to the best of my knowledge .If I am being given the opportunity to serve the organization I will leave no stone unturned to prove my ability.
1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.