Objectives :
A challenging position where I can utilize my well-established knowledge and creative skills for the benefit of the organization or Research and Development Department in reputable firm in the field of Electronics & Telecommunication.
Work Experience :
1.AYOUN ESTABLISHMENT.
Ayoun (A E) is a high-tech Establishment based in Jeddah, dedicated to IT and Security Systems serving sales, Installation and Maintenance of LAN, WAN and IP/digital video recording (DVR) products CCTV cameras/IP Surveillance,Access Control Systems,Fire Alarm & Fire Fighting Systems and handle building automation.
Professional Gulf Experience :
PLC Programming in Allen Bradley using Rx logix 500 & 5000 & Seimens Simatic Manager,step 7. and handelling project of installing security systems,ip & analog cameras.
Projects Handled :
Project : Saudi Arabian Airlines Traning Institute,Jeddah
Project : Neesma Trading Company,Jeddah
Project : Saudi Japanese Automobile High Institute,Jeddah
Project : Tokio Marine Saudi Arabia,Jedd
Project : Dunia Multimedia,Jeddah
3. Tata Tele Services (maharashtra Limited) :
Worked as RF DT & OPTIMIZATION since (2 August 2010 – 12 October 2011) in Nanded cluster.
Responsibilities :
To perform physical optimization of sites for improving KPI
Network-Optimization by drive tests, antenna tilts, antenna orientation changes and tuning the Cell-RF parameters
Analysis of Drive Test files for taking care of Interference (ACI / CCI) in the Network, re-planning of frequencies in problematic areas.
Analysis of Drive Log files & providing solutions for customer complaints
Recommendation of RF Specifications of the sites including type of Antenna, Tower height to meet the coverage Objective.
TO perform SCFT & SPEED TEST
TO handle MNP cases
To perform Cluster Drive and analysis Log Files.
Network Problems like Pilot Pollution, Bad Coverage area, Drop Calls, Access Failures, Handovers Problems (Intra Frequency, IRAT, Low Throughput etc.
Worked for BSNL ALCATEL 3G PROJECT :
To perform Drive Test for UMTS Services by using Agilent E6474A (14.2)
To perform Cluster Drive and analysis Log Files.
Worked on WCDMA RLC throughput, IRAT handoff success rate, SIR, BLER, CPICH Ec / No,Ec / Io, CPICH, RSCP and power control parameters etc.
Network Problems like Pilot Pollution, Bad Coverage area, Drop Calls, Access Failures, Handovers Problems (Intra Frequency, IRAT, Low Throughput etc.
Knowledge about coding techniques (spreading codes, channelization code, scrambling code, convolution code, turbo codes)
Knowledge of logical, transport, physical channels
Worked for BHARTI 2G PROJECT :
Analysis Network performance statistics e.g. Handover Statistics, Drop Statistics, Neighboring list optimization, their reasons and take necessary action.
To provide all RF details as Antenna Orientation, Height of the GSM antenna etc.
Network-Optimization by drive tests, antenna tilts, antenna orientation changes and tuning the Cell-RF parameters
Performed Drive Test of site for Coverage Check, Call Setup (MOC/MTC), Missing Neighbors, Handovers Check, Hardware Fault, and Antenna Fault.
Performed Drive Test for resolving Co-Channel (C/I) and Adjacent Channel (C/A) Interference, Low Rx level, poor Rx Quality, Call Drops, Handover Failure, Call Setup Failure, SD Drop, TCH Drop, KPI monitoring.
Performed Drive Test for verifying the Downlink Parameters (BCCH, BSIC, CGI, HSN, MAIO, Hopping) as defined by the planning team.
Performed Drive Test (Benchmarking) for Network Comparisons
Technical Knowledge :
Basic knowledge for Data Communication, network component, modems, network protocols.
Introduction to electronic exchanges, switching concepts, and power plants in telecom systems.
Knowledge of transmission media, twisted pair, coaxial, OFC, splicing techniques.
Knowledge about GSM Spectrum, frequency re-uses, sectorisation, BTS function, Structure, BSC Controller BSS interface and handover.
Basic knowledge for MSC architecture, physical and logical channels, TCH, BCCH, CCCH, Um interface
Introduction to mobile originated and terminated call, mobility, cell planning, planning factors, propagation effects, free space loss etc.
Knowledge of antennas for mobile communication, antenna installation, BTS towers, shelters and earthling, power supply and power backup, MW antennas and equipment.
Proficieny :
TOOLS : MAPINFO 8.0, Google Earth, Global Mapper
DRIVE TEST TOOLS : TEMS Investigation 8.0, Agilent E6474A 14.2.
Educational Qualifications :
Completed BE in Electronics & Telecommunication Engineering (E&TC) from MGM’s COE, Nanded, under S.R.T.M.
University Nanded, Maharashtra in 2010 with First Class 64.67%.
Completed XII, From Latur Board Maharashtra with First Class 60.83% in 2004.
Completed X, From Latur Board Maharashtra with First Class 71.73% in 2002.
Completed Diploma in CERTIFIED AUTOMATION ENGINEERING.
Training & Courses :
Training in ALL INDIA RADIO STATION in Nanded Maharashtra India.
Industrial Automation.
Graduation Project :
Title : Centralized Industrial Security System
Skills and Core Competencies :
Automation Field Skills
PLC : Siemens ( S7 300,400)Simatic Manager,ABB ( SLC 500 )RS-Logix 500, GE-Fanuc (GE Fanuc 9030 Series )Versa Pro.
SCADA :Wonderware ( Intouch Software Version 9.5 ), Allen Bradley (Rs View 32)
DRIVES :ABB model ACS 150
DCS : ABB – AC 800 M : PLC Control Builder AC 800 m ( Model : AC 800 m) Siemens model PCS 7System.
HMI Programming Designer & SCADA : SIEMENS HMI : Configuration of Operator panel (HMI) using WinCC flexible. Programming and Interfacing of HMI with S7 300 PLC. Communication Protocols (Ethernet, Modbus, Profibus, Optical Modbus)
VFD Variable frequency drive and pneumatics & Field Instruments : Pneumatics – ON / OFF Solenoid valves, Piston Displacements, Control valves and Actuator. (With field instruments as i/p converter, Level Transmitter, flow Transmitter, RTD, Thermocouple).
switching and VLAN configurations preferably work Experience on Extreme Networks switches
Networking installation LAN,WAN.
Soft Skills :
C.
MS SQL SERVER 2008.
SAP modules MM & SD.
Microsoft Office (2003, 2007).
MATLAB.
Simulation, Lab-View & Circuit Makers.
Personal Skills :
Good Communication Skill.
Quick Learner
Honest towards work.
Team worker.
Self motivated & self driven.
Flexiblity.
Date :
Place :