Mr.Rahul N.Nale
Mechanicalengineer –MEP and HVAC
Mob-07304095025,9823693219| rahul_nale AT rediffmail.com
CAREER OBJECTIVE :
Seeking a responsible position in an esteemed company where opportunities exist for innovative and challenging professionals.
To work in a creative environment and effectively contribute towards the goals of the organization.
PROFILE :
Project Execution, Co-Ordination With The Consultants, Clients, Vendores,Contractores Billing, Purchase Order, Work Order Preparation, Quantity Finalization, Costing, Rate Analysis, Vendore Development, Final Ordering, Purchace, Monthly Billing, Preparation Of Boq, Change Management, Order Ammendment, Preparation Of Final Handing Over Documents, Commissioning Reports, Preparation Of Technical Submittals And Drawing Scrutiny Report.
Completed the various type of projects like industrial (Tata motors, Mercedes Benz), IT (TCS,Hinjewadi),Mall(In orbit mall),Pharma(ESAI pharma Vishakhapatnam),residential(marvel-Vista, sonnet),commercial(Marvel EDGE,FUEGO),hospital(Jupiter lifeline hospital, baner pune).
BASED ON :
** Single line diagrams (SLD) and process and instrumentation diagrams (P and ID) for Electrical work, HVAC, Firefighting, hot water generator, Boiler, STP, ETP, compressed air system, PLUMBING work, insulation, Water supply line, and interior work.
** Design basis verification report of Electrical, HVAC, Fire Fighting and plumbing and utility work.
** GA drawings of all the equipment’s like Electrical panels, AHUS pumps, Chillers, Fans, Compressor etc.
** Technical submittals.
EDUCATION :
B.E. MECHANICAL ENGINEER, NATIONAL INSTITUTE OF TECHNOLOGY, JAMASHEDPUR Batch- 2003
EXPERIENCE :
KICONS LTD-FOURTH DIMENSIONS GROUP-Sr. Project engineer-MEP services :
Presently working on Industrial project-WHIRLPOOL INDIA LTD, Ranjangaon ,Pune.
JUPITER LIFELINE HOSPITAL Ltd, BANNER, PUNE :
Sr. Project engineer-MEP services From- Nov-15 – May-18 :
** Now the project was completed along with the Manager. Final handing over, documentation, and cost reconciliation of the project is in progress.
** Taken care of all the MEP services in project including, billing, procurement, purchasing, execution, coordination with all client, contractor, consultant, vendors, for the above project
** Jupiter life line hospital, is going to be one of the biggest, luxurious, hospital of 356 bedded in pune of 4,20,000 sq.ft. with all the special services required for Multispecialty hospital.
C) MARVEL REALATORS and developers pvt.Pune :
** Sr. Project engineer-MEP services From- April-2014 till Nov15
** Taking care of all the MEP services for the following project
** Marvel EDGE –Commercial project of 185000 sq.ft include the commercial office spaces for IT companies, retailers.
** Marvel SONNET –Residential building which include all the amenities.
** Marvel Fuego –Commercial building with the office spaces for the IT and retailers
** Marvel vista pune is a 7storeyed commercial building with 64 offices and showrooms.
D)Shapoorji and paloonji construction ltd pune :
** Sr. Project engineer -MEP services From- Jan-2013 to March-2014
** Project-TATA CONSULTANCY, sahyadripark, hinjeawdi, pune.
** Client-TATA reality and TATA consultancy and engineering ltd.
Regional Office Work :
Mercedize Benze Project- Completed the quantification, rateanalysis, finalbidding, tender ofall the MEP services for MERCEDIEZ BENZE project, pune, chakan of 20crore.
Bridgestone Project :
** Completed the quantification and rate analysis of MEP services.
** Reliance, dahej, Gujarat
** Completed the quantification and rate analysis of MEP services.
** S-3, S2, P3, C2 building TCS project, pune
** Co-ordination with MEP like HVAC, FIRE FIGHTING, ELECRICAL, PLUMBING, FIRE /PA, DATA AND INTERIOR vendors for timely completion of project.
** Material Delivery follows up from all MEP and interior vendors.
** Planning and execution of work.
** Review weekly and monthly progress and meeting with client and consultant for clearances.
** Generation of drawing scrutiny report and submission it to client and consultant.
** Quality checking of material and work and submission of quality report.
** Vendor’s bill and measurement certification.
** Preparation of as built drawing.
** Follow ups for bills and outstanding payment.
** Vendor development.
** Commissioning of HVAC, firefighting, data, and plumbing, fire pa, electrical and plumbing.
E) Synefra Engineering & Construction Pvt.Ltd.Pune :
Sr. Project engineer -MEP services
From- March-2012 to Jan-2013
Project-Mercedes Benz India Pune (Paint Shop and car plant expansion projects and preparing for Q3 projects-200crs cost)
Client-Mercedes Benz India Pune.
Paint Shop :
** Completed the rate analysis for the project.
** Installed and commissioned AHUS and air washer of 32000cfm to 125000cfm capacity -12nos.
** Hot water generator of 10 ton 02nos transparent make.
** Chillers 03 no’s of 390 tons Dakin make.
** Primary, condenser, secondary pumps, and pump skids.
** Cooling towers 450 tons of advances make.
** Electrical panel, cabling.
** GI and SS ducting, process utility piping ,hydrant and sprinkler piping system,co2 system ,insulation, chilled water and hot water piping ,plumbing.
** Prepared as build drawing and handing over documents and measurement, certified final bills.
Car Plant Project :
** Completed the rate analysis for the project.
** Installed and commissioned air washer from 32000cfm to 72000cfm.-03 nos.
** GI ducting, process, utility piping, hydrant and sprinkler piping system, plumbing.
** Electrical panel, cabling.
** Toilet ventilation fans 28 nos, fire escape tunnel system.
** Office area air conditioning with VRF unit.
** Fire pump room installed and commissioned.
F)Suvidha Engineers (I) Pvt.
Ltd.Pune :
Project engineer-HVAC
From -JUNE-2007 to Dec-2011
Project-TIMES OF INDIA PRESS BHOSARI PUNE
Client-TIMES GROP
** Completed the rate analysis for the project.
** Coordination with the client and consultant to execute the project smoothly and complete it on the schedule time.
** Project planning and execution
** Vendor development, procurement of the material, checked the layout with site condition and suggests necessary changes.
** Take approval from the consultant and client.
** Installed water cooled screw chillers of kirlosker make (03 nos ) of 213TR,PHES and electrical panel with cabling
** Chilled water, utility, CA, FW, piping for the process and in general.
** Installed the primary, secondary, condenser pumps and pump skid with piping and insulation
** Installed the AHUS, ventilation axial fan and ducting
Project-Inorbit Mall, Pune :
Client-K Raheja Group
** Completed the rate analysis for the project.
** Single handedly and successfully completed and handed over one of the biggest project (18 cror cost )of suvidha engineers in pune region
** Project planning and execution.
** Vendor development, procurement of the material, checked the layout with site condition and suggests necessary changes
** Installed and commissioned TRANE MAKE 760TR water cooled screw chillers (03 no’s) and 375 TR (01 no’s) which is shifted from the basement of in orbit mall washi .
** Installed cooling tower of advance make 760Tr 05nos.
** Installed and commissioned the chilled water, condenser water, drain water piping of around 20km
** Installed and commissioned 256 no’s of AHUS, 56no’s of FCUS, (SAVAIR MAKE) SPLIT UNITS28 NOS and 84 NOS of ventilation, staircase pressurization fans Krugermake.
** Installed and commissioned ducting of ar10000sq.mtr.
** Installed and commissioned electrical panel for plant room and its cabling.)
** Completed electrical cabling from 50 sq.mm To 4 sq.mm around 10000rmtr.
** Installed and commissioned Parking ventilation system including 128nos.jet fans, axial fan 10nos of 64000cfm and co detection system.
** Timely completed the measurement with third party certification (Currie and brown).
** Completed the final bills with 16 running bills with another 2 cror retrofit billing.
** Prepared handing over documents, technical submittal.
** Successfully handed over the project.
Project-ESAI PHARMA (JAPANEES PHARMACEUTICAL COMPANY, VISHAKHAPATTANAUM :
Client-ESAI PHARMA
** Project execution.
** Installed ducting of process building
** Installed chilled water and hot water piping.
** Ventilation unit (15nos)
** Installed ARU 15 nos for the process building.
** Installed electrical panel and cabling for the plant room and ventilation.
** Completed insulation of thermocol, glasswool, sand cement plaster,
Project-Tata Motors, Pune :
Client-Central Project And Work Department
** Completed the Tata motors weld shop project, engine assembly, body shop, j7 projects of car plant, pimpri pune .
** It’s around 08 no’s of projects pending from 2003 from suvidha which is completed with final billing and handing over to the clientProject of evaporative cooling system.
** Installed air washer of 185000cfm to 250000 CFM for the new weld shop project and other.
** Completed ducting of around 20000 sq.mtr and piping.
** Electrical panel installed and commissioned.
** Completed the billing and handed over to the client.
G)Comfort HVAC System, Pune :
Project engineer HVAC
From- July 2006TO June 2007
Project-TATA MOTORS PUNE
Client-CENTRAL PROJECT AND WORK DEPARTMENT
** Completed the evaporative cooling system project in TATA MOTORS, PIMPRI, Pune.
** Project planning and execution.
** Installed the ventilation system for the paint shop project, weld shop, assembly shop
** Exhaust system for the engine test bed with ss piping and ventilation and fresh air fans
** Completed the roof ventilation system for the TATA WINGER, ACE, TRUCK SHOP, 0
H)LAXMI NIRMAL INDUSTRIES, SANASWADI, PUNE :
Project engineer –mechanical
From- APRIL 2005 TO July2006
Project-ETHANOL PROCESSING PLANT
** Completed the erection and commissioning of ethanol processing plant and produced 99.99% pure alcohol from the slurry.
** Project planning and execution.
** Installed and commissioned the 10tone coal fired boiler.
** Installed and commissioned the pumps and process piping.
** Fabricated 150000 liters of MS tank for the storage of ethanol, and slurry.
** Various structural plat form fabricated
** Installed and commissioned the electrical panels and its cabling for the process plant.
I)INDIAN ENGINEERNG CONSTRUCTION COMPANY, CALICUT :
Project engineer –Mechanical maintain ace
From- Feb2003 to April 2005
Project-Ambuja cement, chandrapur
FIRM-ECC, Chandrapur is the one of the vendor of AMBUJA CEMENT COMPANY who execute the various projects in the cement plants. They fabricate tanks, kiln tiers, do the maintenance of cement mill, exhaust blowers, and other rotating equipment’s.
Job Profile :
** Successfully completed the kiln tire replacement job and maintenance of the cement mill
** Project planning and execution.
** Installed and commissioned the kiln tire.
** Maintenance of cement mill.
** Fabricated tanks, hoppers etc.
** Various structural plat forms fabricated
PERSONAL DETAILS :
Permanent Address - Flat no. C-301, Vastupurum society, ubalenagar , wagholi, Pune 412207.
Date of Birth - 17th DEC 1978
Language Known – English, Hindi, and Marathi.
Current CTC - 8.76 lac per annum
DECLARATION:
I hereby declare that all the information furnished is true to the best of my knowledge and I can produce all the relevant certificates as and when required.
DATE :
PLACE :