CURRICULUM VITAE
R.LAKSHMANAPERUMAL.B.I.E
Plot no :A,Block no:B
No 182 E,R C Queen park
Madavaram high road
Madavaram
Chennai-60
Cell : 9841817017
rlakshmanaperumal AT rediffmail.com
CAREER OBJECTIVE :
Interested in working as part of a motivated development team involved in challenging, innovative project, where I can exercise my knowledge base and become a successful team member.
EDUCATIONAL PROFILE :
Bachlor of industrial engg
WORK EXPERIENCE : 12 years
Name of the Company Department Designation Period Years Salary Drawn Reported to :
Ashokleyland (ISO 9001 ,TS 16949) Manufacturing Asst manager 31.08.2007 to till date 6 years 2 month 40000 AGM Rane trw power stearing Chennai(iso 9001,tqm,deming award company) production Assistant executive 11.04.2005 to 30.08.2007 2 years 4 months Rs15000/- Sr manager
Hindustan Power Plus Ltd., Hosur (An ISO 9001, ISO 14001, QS 9000 Certified Company) Production Diploma engineer 23.04.2001 to 11.04.2005 4 Years Rs.7500/- Sr.Engineer
Microtech CNC (P) Ltd., Hosur (An ISO 9002 Company) Machine shop CNC Dept. Supervisor 10.06.2000 to 15.04.2001 1 Year Rs.2500/- Production Engineer
WORK EXPERIENCE DETAILS :
1.NAME OF THE COMPANY :
Ms.Ashok Leyland Ltd (ISO 9000,TS16949,ISO 14001 CERTIFIED UNIT) MANUFACTURING PRODUCTS Manufacturing Heavy vehicle
DESIGNATION : Asst manager
DURATION : Aug 2007 TO TILL DATE.
REPORTED TO : AGM
Job profile :
Cam shaft manufacturing line setup and take component trail and achieve Cpk .Make the line ready to production. Trouble shooting in the machine of LANDIS ,HELLER .Establish the special process (hardening ,Tempering ,Phosphate) ,
New machine trail and make ready for production
Trouble shooting in grinding and milling machine (LANDIS,HELLER)
New component trail and check the inspection
Operating CMM,ADCOLE(Cam shaft angle checking machine)
Prepare the document of TS 16949
PPAP document prepare for new component
Establish the line to achieve the maximum capacity
WORK EXPERIENCE DETAILS :
2.NAME OF THE COMPANY : M\\\\\\\\\\\\\\\\s.RANE TRW STEERING LTD (ISO 9000,TS16949,ISO 14001 CERTIFIED UNIT)
NATURE OF BUSINESS : Leading Manufacturer of Power Steering, steering Pump,
MANUFACTURING PRODUCTS :
1.Heavy vehicle and light vehicle Power steering (telco,ashok lyland,genral motors)
2.steeringpump (5lpm,5lpm,12lpm)
DESIGNATION : ASSISTANT ENGINEER
DURATION : APRIL 2005 TO TILL DATE.
REPORTED TO : Sr. Manager
Job profile :
housings, con-rods are being produced in our sopasthicated flexible CNC machine shop., lapping ,grinding,hoing process
Daily production target gap analysis
Prepare PDCA for gap analysis
Achieving the production targets by reduce the gap
Involving QCC,QIT.activities
Prepare daily plan for assembly
Involving cost control activities by reduce tooling, coolant cost
Involving TQM activities
3. NAME OF THE COMPANY : M/s.HINDUSTAN POWER PLUS LTD., (A CATERPILLAR CONCERN, U.S.A), (AN ISO 9001, ISO14001 & QS 9000 CERTIFIED UNIT), HOSUR, TAMILNADU.
NATURE OF BUSINESS : Leading Manufacturer of Heavy Duty Internal Combustion Engines & Generator Sets.
MANUFACTURING PRODUCTS :
1. CATERPILLAR Diesel Generator Sets from 180 KVA – 2000 KVA.
2. Heavy Duty Diesel Engines.
3. Automobile components for Exports.
DESIGNATION : DIPLOMA ENGINEER
DURATION : APRIL 2001 TO APRIL 2005.
REPORTED TO : Sr.Engineer.
Job profile :
Critical engine components like Cylinder blocks, heads, housings, con-rods are being produced in our sopasthicated flexible CNC machine shop.
Man mangement
Shop floor handling
Achieving the production targets
New component prove-out in CNC machines.
First off inspection and periodic approval have been given for in-house components
Updates daily production data,men,machine hours etc
Attend periodic review meeting and day-to-day constraints meeting
Developing team and encourage KAIZEN activities
Provide multiskill to the workmen
Preparing CNC programming for various components.
Improve productivity and product quality
Find Route cause analysis and corrective the process as well as quality problems.
Continuous improvements in process methods.
Take setting in CNC machines.
Assisting SIX SIGMA block belts
Co-ordinating with production related departments.
Capabilities :
Strong work ethic and the ability to work well with a team environment.
Capable of read blue prints of moulds.
Exposure to co-ordinate measuring machine and its reports.
Knowledge of create the programming in FANUC and SINUMERIC CNC systems (VMC&HMC)
Knowledge of tooling
Knowledge of Fixtures
I have the knowledge of process FMEA, control plan elements, SPC.
Achievements :
Reduced the set-up time in CNC machines.
Introduction of advanced cutting tools
Reduced the rejection rate through poko yoke
Cycle time reduction
Group activities :
Re-engineered the used inserts &drill,taps
Identifying & Implement the Safety work methods.
Machine handling setting & Programming knowledge :
CNC, Vertical and Horizontal machining center – Snumeric and Fanuc System.
MAKINO FANUC MACHINES (HMC, VMC)
MCB – 1513, FNC 1210, FNC 128, A55
BFW SINUMERIC MACHINES (HMC)
TMC 1000-7, TMC 1000 –9, TMC 1000 –S, TMC 630, TMC 800
SPM :
Line boring machine & Cheek Milling machine for cylinder blocks machining & conventional machine tools.
Honing machine ,lapping machine and special rotor grinding , cam grinding
Training Programmes attended
Safety.
Poka yoke
Six sigma
Kaizen
Environmental management system
Class – A,TQM
4.
NAME OF THE COMPANY : M/s.MICRO-TECH CNC PVT.LTD., (An ISO 9002 Certified Unit), Sipcot – II, Hosur.
NATURE OF BUSINESS :
It’s an Ancillary unit for machining of automobile components to the reputed concerns.
Air compressor Bracket, J-flanges etc to VISTEON FORD LTD.
DESIGNATION : Supervisor – CNC section M/c.shop.
DURATION : 10.06.2000to 15.04.2001
REPORTED TO : Engineer – Production
Job Profile :
Shop floor Handling.
Work allocation to the workmen
Involved in CNC Machine tool settings & operations
C.N.C machine programming.
Continuous focus on cycle time reduction by introducing advanced tools, process methods etc.
Machine Handled & Programming knowledge :
CNC Lathe, Fanuc O-T series, LAL02, LSL, AL-2, LMW, Coimbatore.
Vertical machining centers – Fanuc O-M series – Kodi40, LMV-Junior, LMW, Coimbatore.
Technical Qualification :
Diploma : Diploma in Mechanical Engg.
Institution : Mohamed sathak polytechnic
Year of Passing April 2000
Classification : First class with Honours.(79.5/)
COMPUTER KNOWLEDE :
AUTOCAD 2000
M.S. Office.
Personal details :
Permanent Address : s/o.R.Ganagalakshmi
Sevelpatti (p.o)
Kannirajapuram(via)
Ramanathapuram (dist)
Languages Known :
Read & Write : Tamil & English
Speak : Tamil & English
Present salary drawn : Rs 5.2 laks per annual
Expected Salary : Rs 8 laks per annual
Reason for change : For Better prospects.
Notice Period to Join duty : Max 30 days.
Contact No : Cell:9841817017
E.mail : RLakshmanaperumal AT rediffmail.com
Date of birth : 15.06.1981
DECLARATION:
I hereby declare that above statements given by me are true and correct to the best of my knowledge.
(rlakshmanaperumal)