Welcome Guest

Piping / PDS / PDMS >> Piping Design Engineer / Designer/ Supervisor 
Piping Engineer Resume Sample, Experience : 3 years

Sponsored Links:


Name of the Candidate:[Private]
Name of the Post Applied:Piping Engineer
Job related skills / software:Pipes and fittings, selection of valves, Preparation of MTO, Piping Material Specification, Able to do modeling in PDMS like Equipment modeling, Piping, Structures, Pipe work, Piping Symbols, Proficient with PDMS shortcut commands, Equipment layout, piping layout.
Category:Piping / PDS / PDMS
Sub Category:Piping Design Engineer / Designer/ Supervisor
Years of Experience:3 years
Salary Expected per Month(Rs):Negotiable
Highest Qualification attained:Diploma
Major / Specialization:Piping
Email Id:[Private]
Are you looking for job now?:Yes
Can the recruiter contact you?:Yes
Sponsored Links:

Resume Format / CV Sample Template / Example / Model :


Mr. Vishal Nargund
Email ID  : vishal.nargund AT gmail.com
R1/715, Aashirvad CHS,
MMRDA Bldg, Andheri (E)
Mumbai, India
Cell  : 09845369604

Objective  :
I am looking to work for an EPC that needs a highly motivated Piping Engineer. I would like to utilize the best of my abilities to improve the productivity of the team & thereby enhancing my career prospects & growth.

Technical Exposure  :
Pipes and fittings, selection of valves.
Preparation of MTO, Piping Material Specification.
Able to do modeling in PDMS like Equipment modeling, Piping, Structures, Pipe work.
Piping Symbols.
Proficient with PDMS shortcut commands.
Equipment layout, piping layout.
Ability to read P&ID Diagrams of any process plant.
Considerations to be taken for Preparation of Plot Plan, Equipment layout, General Arrangement drawings, Pump layout, Tank / vessel layout
G.A Drawings based on P&ID and plant layout.
Pipe support and Expansion loop design.
Isometric & orthographic Piping Views.
Pressure design of Process Piping and Component as per ASME B 31.3 (Straight Pipe, Flanges, Elbows and Miter bends, Reinforced branch connections, Blanks, Blind flanges).
Pipe Thickness calculation, Pipe size calculation, Pipe Rack width calculation, etc.

Knowledge Of  :
International codes like ASME B31.3, B 16.9, B 16.25 etc. & MSSSP standards.

Equipment modeling
Pipe work

Work Experience  :
A) Currently working with JSW Steel Ltd in the Coke Oven Dept., as Piping Engineer from April 2010 till date  :

Projects Handled  :
1. Project Name  : Piping of waste water from the ovens to Effluent Treatment Plant.
Designation  : Piping Engineer
Responsibilities  :
Developed orthographic & isometric drawings for the modification project
Prepared Piping Material Specification (PMS). (in accordance to ASME B31.3)
Prepared BOM & MTO for the piping system.
Reviewed about the modification with the maintenance team.
Made use of guide & ‘L’ & clamp supports wherever necessary.
Fabricated Piping spools as per the drawings.
Executed the project i.e. fabrication & erectioning of piping system.

2. Project Name  : Effluent Treatment Plant of waste water from Coke Oven Batteries.
Designation  : Piping Engineer.
Responsibilities  :
Verifying the piping material specification.
Review & cross check of Equipment Layout & Isometrics, Pipe routings from drawings.
Piping of the entire ETP facility, i.e.

Fabrication & erectioning of entire piping system in ETP.
Carried out for two such ETP’s.
Review BOM’s, P& ID’s, and PFD during the erectioning.
Developed Isometrics for certain Pipe routings where Clashes found.

3. Project Name  : Modification of Hydraulic line.
Designation  : Piping Engineer.
Responsibilities  :
Prepared PMS for the system. (in accordance to ASME B31.3)
Preparation isometric drawings for the modification line.
Selection of pipes & fittings, Preparation of BOM for fittings & Pipes.
Generate drawing on PDMS & discuss with the higher authorities & with maintenance personnel’s.
Execution of the fabricated Piping system by replacing the old existing piping system.
Carried out in 4 charging cars of coke oven.

4. Project Name  : Emergency Water quenching system for Hot Coke.
Designation  : Piping Engineer.
Responsibilities  :
Designed water quenching system for hot coke in PDMS.
Developed isometric drawings for the system.
Prepared PMS for the system.(in accordance to ASME B31.3)
Prepared BOM for fittings & Pipes.
Designed a Pipe rack for the system.
Executed its erection & fabrication along with 11 member team.

B) Worked as Quality Control Engineer at Gujarat InfraPipes Pvt. Ltd, Por, Vadodara, Gujarat.  :
It involved inspection of Pipe Fittings like elbows, tees reducers (Seamless & Welded) in accordance to ASME B 16.9 & B16.25.
It also involved carrying out NDT tests like UT, RT & PT.
Offering the fittings for third party inspection like EIL, Technip, SGS, Jacobs, and CPCL.

Interests  :
Learning Hindustani Classical Music from Mrs. Vanishree Kulkarni, Bellary.
Collection of Inspirational quotes which inspires me a lot.
Reading books like Mega living, Success from positive attitude, The Secret etc.

Languages Known  :
English, Hindi, Kannada, Marathi, Gujarati.
Ready to RelocateYes

Permanent Address  :
Mr. Vishal Nargund
A-63, Sanidhya Township
Opp ABB, Maneja, Makarpura
Vadodara, Gujarat

Date  :
Place  :


1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.