Objective :
Aspiring to achieve a challenging, dynamic and responsible position that will utilize and strengthen the skills for your esteemed concern.
Educational Qualification :
Examination Board/University Institution Year
M.Tech(Power and Energy systems) VTU,Belgaum Basaveshwar Engineering college,Bagalkot(Autonomous) 200810
B.E in Electrical & Electronics VTU,Belgaum Basaveshwar Engineering college, Bagalkot 200408
12th Department of Pre university Education Basaveshwar science college, Bagalkot 200204
10th KSEEB, Bangalore St Anne’s Convent High School, Bagalkot 200102
Work Experience : (from July 2008 to till date):
Presently I am working as E & I Planner with Kharafi National for Abu Dhabi Polymers ltd, Borouge site for shut down project in Abu Dhabi.
I worked as Sr. EngineerElectrical in Lanco Solar energy Pvt Ltd, Gurgaon for 1 year. I was involved in execution of 35MW solar power Plant in Askandra, Rajasthan
I have worked as an Electrical Engineer in Nandi Sahakari Sakkare Karkane (18.14 MW CoGen) plant for 3 years. I have Experience in both projects and Maintenance.
Project :
M.Tech Project (Optimization Of Specifications For Irrigation Pumpset) :
Presents the selection of irrigation pump set based on water requirement and the available water head in the location. It includes the selection of motor and pump specification like Hp rating, Rpm and impeller diameter. A Matlab model is developed, which gives pumpset parameters on giving water requirement and available head at the location.
B.E Project (Automatic Transformer Fault Informer) :
This project aims to send the information to the Electricity board people through SMS using GSM module along with the auxiliary information such as fault type, DTC (Distribution Transformer Centre) number & address, oil level in the transformer, temperature of the oil etc. if any fault occurs in the DTC, then suddenly the information about the DTC will be obtained in the power company, thus by implementing the developed project power interruption can be minimized and various hazards can be prevented.
Nature Of Work :
Projects Planning & Coordination :
Coordination of project from office with site Procurement and Engineering.
Reviewing Engineering drawing and coordinating with procurement for PO placement.
Planning all the project activities.
Conduct review for timely delivery and execution.
Prepare Project execution plan and cash flow management.
Preparation of Activity chart for the project.
Preplanning the materials and manpower required for the project.
Inspection of Electrical equipment like Transformers, Breakers, Cables from vendor’s site.
Rigorous follow ups from Vendors and feedback from site.
Progress reporting to higher authority
Project Execution :
Erection and commissioning of 33/132KV Switch Yard with 20/25 MVA Transformer.
Erection and commissioning of 33KV Transmission line.
Erection and commissioning of VCB, ACB & Inverter.
Erection and commissioning of HT & LT Panels, Transforme
rs, cables Bus trucking system.
Cable tray and Earthing design and site execution.
Relay testing and commissioning.
Industrial lighting.
Maintenance :
Maintenance and observation of all type of electrical and instrument equipments.
Synchronizing process TG with Grid & DG with Grid and TG &DG.
Maintenance and operation of TG and DG and their generation calculation.
Maintenance of HT< of Transformer, Motors & Breakers.
Knowledge of Cane handling, cane preparation, offloading & conveyance systems
Maintenance all the type of panels like AC&DC drive panel, VFD panel, MCC panel, PCC panel & DG panel.
Involving in DCS operation & knowledge about all instrument equipments.
Knowledge about erection and commissioning of power plant& sugar plant.
Involving all the process in power plant like Boilers, Turbine, PRDS System, Cooling tower, RO plant, Fuel handling system and ash handling system.
Switchyard maintenance and Reading Calculation.
Overall plant calculation like import export, DG generation, Consumption of oil.
Key Responsibilities :
Review the preventive, predictive, maintenance Equipment efficiency, bench marking & condition monitoring of equipment.
Contracts and outage management & Involvement in Factory Management Team.
Lead the team in maintaining electrical equipments (Generators, Transformers, HT< switch gears, HT< Drives, VFD’s etc).
Plant Recommissioning.
Assessment of risk in the plant & plant mitigation initiatives.
Knowledge of safety practices safety tagging system, first aid, fire fighting systems among the maintenance persons.
Administrative procedure.
IT Skills :
PRIMAVERA P6
Auto CAD
MAT LAB
SCHEMATICS
Trouble Shooting Skills :
DCS & instrumentation interlocks with electrical control circuits.
VFD’s Drive, AC&DC Drive faults.
Generator protection like relays, power factor, excitation, cooling system, generator settings.
Interlocking system like Belt motors, boiler motors, turbine auxiliary motors, and HT< breakers.
Electrical starter DOL, Star –Delta &Soft starter controlling.
VFD’s Drive, AC&DC Drive panel, MCC panel controlling like relays contactor DCS commands problems.
All the type of breakers & motors power cable connection& their faults& High Voltage and Low Voltage starters.
Over all TG and Boilers problems.
Achievements :
Secured second prize in EExpo project exhibition
Participated in “National level students technical symposium and exposition” at AISSMS Engg TODAY 2007 for paper presentation.
Participated in project competition on” Fault identification in Distribution network” held at AISSM Engg Today 2008, Pune.
Personal Details :
Nationality : Indian
Marital Status : Unmarried
Languages Known : English, Hindi, Sanskrit & Kannada
Declaration :
I hereby declare that the above statements are true to the best of my knowledge and belief.
Date :
Place :