SMRUTHI M
Email : msmruthi1 AT gmail.com
OBJECTIVE :
To be associated and grow with a progressive organization that provides opportunities to apply and enhance my knowledge, challenging skills and innovative environment to cater to latest technologies.
EXPERIENCE :
Presently working as Quality Assurance Engineer at Paracoat Products Ltd Hosur
Paracoat Products Ltd are into NVH Products (Noise, Vibration & Harshness) like Dampeners (Sound Deadener Pads,Anti Vibration Pads), Absorbers (Dash Inner/Outer Insulation, Hood insulation, Trim Insulation, Floor Insulation, Roof insulation,Door Membrane) & Interiors(Moulded Carpet, Luggage Mats, Parcel Tray, Wheel Arc covers, Trunk Covers, Headliners & Floor Mats). NVH Products are also called as Acoustic products.
JOB PROFILE :
** Developing and executing test plans such as APQP, PPAP, and P-FMEA.
** Responsibility to handle the Customer Complaints with Root cause analysis and implementing Action for Non-Conformance like 8D reports.
** Trend analysis for In-house & Customer NC’s.
** Preparing the Product Audit Schedule and conducting audits to strengthen the Quality.
** To Establish and Maintain the Quality Management System of ISO / T.S 9001 : 2008 & ISO/TS 16949: 2009.
** Review of Engineering Change Request and defining PPAP requirements accordingly.
** Handling Customer audits.
** Preparation of Part Inspection Standard, Sample Data Sheet, Agreement of Inspection, ISIR & Work Instructions for Production processes
** Involved in Sample/ Trial lot parts for new projects
** Associated in new project development of OEMs like Daimler India Commercial Vehicles (DICV), Toyota Kirloskar Motors Ltd (TKML),& Hyundai Motors India Ltd (HMIL), Renault Nissan.
TECHNICAL SKILLS :
Software Matlab, Simulink, Spice, 8051 Microcontroller Programming (Kiel Compiler), ATMega controller, C Programming
Operating Systems :
Windows XP, Windows 7,Linux
Others :
MS Office and Internet Applications
EDUCATION :
M.Tech (Power Electonics) R V College of Engineering,Bangalore 2012 77
B E (EEE) Nitte Meenakshi Institute of Technology,Bangalore 2010 60
12th St. Joseph higher secondary school,Hosur 2006 80
10th St. Joseph higher secondary school,Hosur 2004 85
EXTRA-CURRICULAR ACCOLADES :
** Organized cultural events and college festivals
** Represented school/college in various external events.
Project Undertaken during M. Tech :
Title : Digital Control of Low Power Converters
Venue :R V College of Engineering, Bangalore
Time Period :September 2011 – Oct 2012
Synopsis :
The aim of the project is to design and implement a digital controller for low power converters. It is required to maintain a tight voltage regulation and high efficiency.
DC-DC converters are used in electronic devices. An electronic device consists of sub circuits which are operated at different voltage levels. Switched dc- dc converters are used to increase or decrease the voltage for the sub circuits. The dc-dc converters used are Buck and Boost converters. Buck converters are step down converters. The average output voltage will be lesser than the input voltage. Boost converters are step up converters. The average output voltage will be greater than the input voltage. The operation of buck and boost converter is verified using MATLAB. The switched DC-DC converter is digitally controlled.
Digital control methods are now offering good alternatives to analog approaches. Potential advantages of digital controller implementation include improved flexibility, reduced design time, improved system reliability.
In the switching converter the Mosfet switches are controlled using PWM controller. Digital PID regulator is used to regulate the output which is given as feedback to the converter. Implementation of digital controller is done on Atmega controller.
Project Undertaken During B. Tech :
Title : Control of an Articulated Pick and P:lace Robot
Venue : Nitte Meenakshi Institute of Technology, Bangalore
Time Period :Jan 2010- June 2010
Synopsis :The project was sponsored by Center for Artificial Intelligence and Robotics [CAIR], DRDO, Ministry of Defense, under Industrial Robot Automation program. The project aimed at developing 5 Degrees of Freedom Pick and Place Articulated Robot. The Forward and Inverse Kinematic equations of the manipulator were derived and verified using MATLAB. Cubic Spline was used as a Trajectory planner and the Robot was controlled through a computer on a VC++ platform. Kinematic Analysis verification was initially done on Matlab and was implemented. The equations derived were coded on a Visual C platform. Two types of motors were used for the robot namely Rx 64 Dynamixel motors and Servo motors. Communication with the Rx 64 motors was done using RS485 Serial Communication protocol through the computer. Servo motors were controlled using Servo controller.
PAPER PUBLICATION :
Published a paper titled “Digital control of DC-DC buck converter” in International Journal of research and technology (IJERT) ISSN : 2278-0181 September - 2012 (Vol.1, Issue 7)
PERSONAL DETAILS :
NAME : Smruthi M
FATHER’S NAME : R Murali Krishnan
MOTHER TONGUE : Kannada
RELIGION : Hindu
CASTE : Brahmin
LANGUAGES KNOWN : To Read : English, Hindi, Kannada,Tamil.
To Write : English, Hindi, Kannada,Tamil.
To Speak : English, Hindi, Kannada,Tamil
DATE OF BIRTH : 18-11-1988
AGE : 27 Years
DECLARATION :
I do hereby declare that the above mentioned details are true to the best of my knowledge.
Place :
Date :
Smruthi M