Manjunatha
#39/35, c/o VR Phadnis,
1st E cross, Remco layout,
Vijayanagar,
Bangalore. – 560040.
Mail id : manjubit91 AT gmail.com
Mob : +91 9164731932
Professional Summary :
Piping Designer with 3 years of work experience in 3D modeling of mechanical equipments in PDMS, Pipe routing, Preparation of MTO, Isometric extraction and checking, Preparation of G.A. Drawings.
Total Work experience – 3 Years :
Present Company : PetroPhoenix Engineering Solution Pvt. Lim.(From Nov 2014 to till date)
Position : Piping Designer.
Tool Used : PDMS, AutoCAD. Navis work.
Project 1 : MUMBAI HIGH SOUTH REDEVELOPMENT (MHSRD)-Phase 3
Activities and Deliverables :
** 3D modeling of Pipes.
** Modeling pipe support.
** Preparation of Valve MTO using P&ID.
** Preparation of Fittings MTO using P&ID.
** Preparation of Piping MTO from 3D model
** Extraction of piping Isometrics by PDMS.
** Checking piping Isometric with P&ID, Equipment drawing and Civil drawings.
** PDMS clashes and data in-consistency checks and resolving them.
Project 2 : FPSO CIDADE DE CAMPOS DOS GOYTACAZES MV-29.
Activities and Deliverables :
** Extraction of Piping GA drawings from PDMS.
** Extraction of Special Pipe supports (SPS) from PDMS.
** Annotation of extracted Piping GA drawings and SPS drawings.
** Checking the SPS drawings and GA drawings.
** Back updation of SPS and GA drawings.
Project 3 : DUBA GREEN INTEGRATED SOLAR POWER PLANT
Activities and Deliverables :
** Preparing and reviewing the pipe routing in line with P&ID & pipe material specification.
** Equipment modeling as per Vender GA using PDMS.
** Extraction of Piping Isometrics by using PDMS.
** Checking piping Isometrics with P&ID, Equipment drawing and Civil drawings.
** Pipe support modeling using PDMS.
** Preparation of Bulks, support & Insulation MTO.
** Preparation of Piping GAD, Support GAD.
Project 4 : HOT OIL HEATER (FLUOR/SASOL, FURNACE IMPROVEMENTS, TEXAS, USA)
Activities and Deliverables :
** Equipment modeling as per Vender GA using PDMS.
** PDMS modeling of all obstruction volumes such as maintenance path, Escape routes, access walkways, etc.
** Piping GA’s & support drawings extractions using DRAFT and annotations to finalize them for issue.
** Pipe support modeling using PDMS.
** Preparing and reviewing the pipe routing in line with P&ID & PMS.
** Preparation of Insulation and Support MTO
Project 5 : AVIATION FUEL STATION –SHELL MRPL.
Activities and Deliverables :
** Equipment modeling as per Vender GA using PDMS.
** Preparation of MTO’s (Bulks, support & Insulation) using P&ID
** Preparing and reviewing the pipe routing in line with P&ID & PMS.
** Extraction of Piping Isometrics by using PDMS.
** Successfully interacting with other disciplines.
** Checking piping Isometrics with P&ID, Equipment drawing and Civil drawings.
** PDMS clashes & data in-consistency checks and resolving them.
** Preparing final support summary based on ISO’s.
** Reviewing the PDMS model at 30%, 60%, & 90% in both PDMS & Navis.
Previous Company : Cades Studec Technologies India pvt.lim.
(From Nov.2013- Nov.2014)
Position : Design Engineer.
Tool Used : AutoCAD, Catia V5
Projects : Maintainance manual, illustrated parts catalog, for Airbus A380, A350, and A320 aircrafts.
Activities and Deliverables :
** Non parametric modeling of different Aircraft parts
** Drafting the modeleded parts according to Airbus Standard.
** Checking according to Airbus Standard.
** Converting the orthographic views into isometric views.
Thesis :
Title : Optimization of pressure relief valve in transmission system of helicopter
Company : Hindustan Aeronautics Limited (HAL) Bangalore.
Educational Qualification :
** B.E. (Mechanical) Bangalore Institute of Technology Bangalore (B.I.T.) Visvesvaraya Technological University, Belgaum. (VTU) 2009- 2013 82.56%
** PUC SDP Temple PU College, Mandarthi, Udupi Taluk and District. Karnataka State Board 2007-2009 83.33%
** SSLC Govt. High School Avarse, Udupi Taluk and District. Karnataka State Secondary Education Examination Board. 2007 88.32%
Strengths :
** Self motivated.
** Adaptable.
** Time management.
** Team worker
** Enthusiastic towards new challenges.
Personal Details :
Father’s Name : Mr. Seetharama Shanbhogue
Postal/Permanent Address : Manjunatha S/o Seetharama Shanbhogue Shri-pradayini nilaya, near D.B. School Vandar, Vandar post, Udupi taluk&Distt. 576223
Date of Birth : 10th January 1991
Languages known : English, Hindi, Kannada
Declaration :
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Place :Bangalore.
Date :
(Manjunatha)