S.SRIRAME mail id : srirammech.1989 AT gmail.comSkype id : Sriraman.139 AT skype.com
Mobile No. +966545221548(Saudi Arabia)
Application for the post of QA/QC –Mechanical Engineer (Welding & Piping Inspector)Career Objective :
To Contribute Successfully towards the growth of organization, utilizing personal skills, dedication towards works & implementing innovative techniques, also ensuring personal growth.Certification :Welding :
CSWIP 3.1 Welding Inspector Level II
Certificate Number 72330ASNT (NDT Level –II) :
PT (Liquid Penetrant test)
MT (Magnetic particle test)
RT (Radiographic test)
UT (Ultrasonic test)RTR/FRP Piping :
Undergone RTR/FRP Training certificate at FUTURE PIPE INDUSTRIES (KSA)
Certificate Number FPI 2011-2012-155Total Experience : 2 YearsWork Experience :Present Organization :Company : Larsen & Toubro Atco, Saudi ArabiaPosition : QC-Mechanical Inspector (welding & Piping –RTRP/FRP)Period : July 2012 to till dateProject : Polyethylene-Petrochemical project
LSPB 1 (Lump Sum Procure and Built)Client : Sadara and Dow chemical company (Joint venture)Previous Organization :Company : Larsen & Toubro Atco, Saudi ArabiaPosition : QA/QC- Mechanical EngineerPeriod : July 2011 to June 2012Project : JERP (JUBAIL EXPORT REFINERY PROJECT)SATROP PROJECT :Client : S K Engineering and ConstructionOwner : Saudi Aramco Total Refining & Petrochemical Company, Jubail 2Present organization :Position : QC Mechanical Engineer(Piping Inspector-RTR/FRP)
(July 2012 to till date)Project : Polyethylene
DutiesandResponsibilities – Underground Piping
Preparation of Inspection and Test Plan, checklist, procedures and review of construction drawing.
Material Receiving inspection of all RTRP/FRP Pipes and fittings, Gasket, valves, flanges, bolts & nuts in compliance to material list, mill certificates, test reports and correct material specification.
Control of quality for piping fabrication such as fit-up, visual and dimensional inspection conforming to approved for construction drawings.
Responsible for issuance of Non – Conformance Report if any violation and out of standard for piping works.
Conducts quality co-ordination meeting and initiate corrective and preventive action.
Inspection of UG RTR piping spools fabrication, installation and testing.
Assign as hydro test engineer for all piping and thermoplastic piping, shop fabrication.
Line flushing, air blowing; pressure testing, piping lay-up inspection, relief valve installation, re-instatement and final inspection for mechanical completion.
Responsible for inspection of pipe spools for shop and fabrication such as fit-up, dimensional and visual inspection as per SADARA Standards
Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system(QMIS)
Witnessed, checked, monitor and inspect of hydro test pressure as per SAES-004(General Requirements for Pressure Testing)
Prepare Non- Conformance Report (NCR), Preventive Action Request (PAR) and initiate corrective Action for every violation and out of Standard of Construction activities.
Close log book entry or surveillance violation.
Assigned as QC-Piping Inspector for Fiber Glass Reinforced Plastic Piping (FRP) of installation and spool fabrication for 24” Fire water line and 72” cooling water line-Adhesive bonded joint and Lamination joints.
Witnessed and inspection of FRP piping system for Adhesive bonded joints, Lamination joint, Barcol hardness as per ASTM D 2583.
Maintaining the storage conditioning of all fiber glass woven roving 270,360,580 g Adhesive kits, chemicals such as Epoxy resin, Hardener, vinyl Ester Resin etc.Previous organization :Position : QA/QC – ENGINEER (July -2011 to June-2012)Project : Jubail Export Refinery Project, Package -5B /SK E& C, SATORP.
Duties and Responsibilities –Above ground Piping
Material identification and inspection report preparation and to offer client inspection.
Welder qualification test arrangements and witness as per ASME SEC.IX for piping.
Fit-up & weld visual inspection piping as per ANSI/ASME B31.3
Pre-heating & PWHT arrangements & chart verification.
Receiving Incoming materials from vendors.
Preparing inspection reports for fit up & welding.
Co-ordinate with client quality engineer for final punch listing.
Control of Quality Control documents and maintain its status list.
Inspection of deliveries of materials to assure that they are within tolerances, grade in quality as specified, that they are properly stored and handled, and that they have been not damaged.
Raising RFI’s for each item of work completed and at site for witness.
Fit up inspection, orientation checking.
Identification of Radiography joints.
Taking NDT clearance from Clients.
Repair attending of joints.
Inspection of fit up and welding of joints.
Radiography offer for radiography joints.
Documentation maintenance for ISO records.
Liquid Penetrate examination.
Control of Weld quality as per approved QC Procedures and Standards and maintain QC records.
Control of management and execution of all activities as per specification codes, approved procedures.
Familiar with hydro test.
Knowledge of plant piping & Fittings.
Valve testing RFI rising with construction team coordination.
Valve Inspection and Testing arrangements and witness with EPC/SATORP Inspectors as per API 598.Valve Type :
Gate valve- Tested both sides of valve body and seat.
Familiar with FRP/RTR Pipe.
Undergone 5days training program RTR/FRP Pipe in FUTURE PIPE INDUSTRIES at Dammam Industrial city -2, Saudi Arabia.
Knowledge of Glass fibers ,Resins and types joints for FRP Pipe
Woven Roving Standard 270 grade, 360grade, 580grade using in FRP Pipe.
Adhesive joint and Lamination jointEducational Qualification :
Year of Passing Institution/college Degree %Percentage
2012 to 2014 Institute of Distance Education, Madras University, Chennai. Sponsored links :
MBA in Operations Management Pursuing 2007 to 2011 Adhiyamaan College of Engineering-Hosur, Krishnagiri District, Tamil Nadu, India.
B.E in Mechanical Engineering 8.49 (CGPA) 2005 to 2007
Wisdom Matriculation Higher Secondary School, cheyyar. HSSC 74.67% 2004 TO 2005
Dr. V. Genguswamy Naidu Matriculation, school, cheyyar. SSLC 60%COMPUTER PROFICENCY :
Microsoft Office 2010
MS-word, MS-Excel, Power Point
CATIA - V5
C-works (Welding based Computer Applications)
Updating Fit-up Reports, Weld visual Report, RT, PT, MT, UT Reports in C-WorksTECHNICAL QUALIFICATION :
RTR/FRP (FUTURE PIPE INDUSTRIES) undergone 1 week training Program At Dammam Industrial city 2.WRITTENANDSPOKENLANGUAGES :
Saudi Arabia.STRENTHS AND VISION :
Willingness to learn
Ability to deal with people diplomatically
Excellent verbal and written communication skills.
Good leadership qualityIDENTITY INFORMATION :Passport Number :J1473857Place of Issue :ChennaiDate of Issue :02/11/2010Date of Expiry :01/11/2020CONTACT INFORMATION :Father Name : A.SekarNationality : IndianMarital Status : BachelorDate of Birth : 22-03-1989Driving License No : TN70 20100001262 (INDIA)Believe In : Hard Working and God.DECLARATION :
I hereby declare that, the information given above is true to the best of my knowledge and I assure you that I will work in the right earnest and fulfill the expectations of my superiors.
1. This is an online resume, managed by the candidate.
2. Create your online resume here.
3. If candidate allows, recruiters can contact the candidate directly.
4. Personal and contact details can be kept private optionally by the candidate.
5. Create a link to this online resume where ever you want in the web.